7.32" Stroke 1000 lbs 12 Volt DC Linear Actuator

Item Number: 5-1680-8

Price: $303.20
TOP
Back to top

7.32" Stroke 1000 lbs 12 Volt DC Linear Actuator

7.32" Stroke 1000 lbs 12 Volt DC Linear Actuator

item number: 5-1680-8 PRICE: $303.20 18 In Stock Regular Stock Item


calculate shipping
Calculate Shipping for Item 5-1680-8
7.32" Stroke 1000 lbs 12 Volt DC Linear Actuator
Item Number: 5-1680-8
Price: $303.20
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 162 of our current catalog
Description
12 VDC 1000 LB. LINEAR ACTUATOR
Brand new, GLIDEFORCE model LACT8-1000B heavy duty linear actuator. Ball screw drive with built-in overload clutch. Metal housing is water resistant and sealed against dust. Permanent magnet motor. No limit switches or potentiometer.

SPECIFICATIONS
  • Stroke 186mm (7.32")
  • Voltage 12 DC
  • Push/Pull Rating
      Dynamic 1000 lbs. max
  • Extension Speed
      No Load 0.66 in/sec
      Max Load 0.56 in/sec
  • Amps
      No Load 2.4
      Full Load 13.2
  • Gear Ratio  20:1
  • Duty 25%
  • Operational Temperature Range
       -13° F to +149° F
  • Enclosure IP65
  • Pin Holes 1/2"
  • Retracted Length 16.06"
  • Shaft Dia. 1-1/8"
  • Size 17.08" x 3.04" x 5.97"
  • Shpg. 13 lbs.
More Specs
Click on boxes below for more information about this product.
Wiring DiagramMore SpecsAdditional InformationMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 8

when used for a small dump bed and bed is lowered fully will clutch slip to lock actuator down without damage to unit. same question for full extension of actuator.

A: No. The overload racheting clutch is a safety mechanism only and use should be stopped as soon as it is heard. Running the actuator past the clutch will wear out the mechanism in fairly short order and result in a loss of usable power.

Is the push and pull max loading the same or is it only rated to push?

A: These actuators are rated for push and pull 1000 lbs.

How heavy of wire does this unit require?

A: The motor leads are 14 gauge wire.

can the bottom anchor eye be rotated 90 degrees? if so how?

A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.

Does this have the automatic limit stop for up and down?

A: These do not have limit switches.

Will this unit hold its position with the max dynamic load? I.e. will it "back drive"?

A: These are ball screws that rely on an internal brake for load holding. It should not back drive at the rated dynamic load, unless external conditions (vibration, load spikes due to travel) act upon it.

Can the mounting holes be rotated 90 degrees with respect to the body. I have a clearance problem and need to rotate the motor portion out of the way.

A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.

What is the shaft made of on this? Steel? Alum? Thanks

A: The acme rod which extends out is steel.

Recently Viewed
Email a Friend
7.32" Stroke 1000 lbs 12 Volt DC Linear Actuator
Item Number: 5-1680-8
Price: $303.20
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

7.32" Stroke 1000 lbs 12 Volt DC Linear Actuator
Additional Comments:

Please wait...
Newsletter SignUp