8.03" Stroke 500 lbs 12 Volt DC Linear Actuator GlideForce LACT8-500A Item Number: 5-1679-8 Price: $229.25
Estimate shipping to:
Shipping Notes: * UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
12 VDC 500 LB. LINEAR ACTUATOR Brand new, GLIDEFORCE model LACT8-500A heavy duty linear actuator. ACME screw drive with built-in overload clutch. Metal housing is water resistant and sealed against dust. Permanent magnet motor. No limit switches or potentiometer.
SPECIFICATIONS
Stroke 204 mm (8.03")
Voltage 12 DC
Push/Pull Rating Dynamic 500 lbs. max
Extension Speed No Load 0.66 in/sec Max Load 0.56 in/sec
need a actuator with same specs as this one, except mine has a 8.5" stroke and is 17" center to center on pin holes or 18" end of shaft to end of shaft. do you have one?
A: We do not at this time, no.
Date Submitted: 06/20/2017
How many cycles is it tested for?
A: We do not have any information from the manufacturer regarding lifespan cycle tests.
Date Submitted: 04/17/2017
Is the 500 lb rating the amount it will lift or the weight it will hold static? I will be using this to lift a pretty heavy boat hatch on a 28 ft Sea Ray.
A: The 500 lb figure is a dynamic load rating.
Date Submitted: 02/01/2017
Do you sell the overload clutch for this product? Mine is overloading with an empty load
A: We do not sell the overload clutch. The manufacturer advised that if the clutch wears out to that point, the entire unit should be replaced. If the clutch is overloading frequently in use, a heavier actuator or a limit switching system to eliminate running against the clutch may be beneficial.