New, generator panel outlet enclosure box with hinged cover. Electrical components are mounted in a plastic enclosure designed for surface mounting to a panel. Four stud mount for use with 3/16" thread cutting speed nuts. One twist-lock and two duplex receptacle outlets. Two push-button reset circuit breakers. Use for generators, electrical panels, power center for a workbench, or remove the components to install in other applications.
Since you Don't have a plug for the back of this. Do you have rubber coated terminals that are the right size?
A: We do not, no.
Date Submitted: 07/16/2018
Can you tell me why the neutral is jumpered to the ground on one of the 120v outlets? Also, why are there two separate parallel neutral connections? Thanks
A: No. We have no information about what these were from or why they are wired that way.
Date Submitted: 12/13/2017
Do you know the manufacture of the panel or more importantly the rear connector part number or manufacture? I would like to buy the mating connector to wire this in to my generator. Thank you.
A: Sorry these is no further information on these. The housing has no indication of what generator manufacturer they were built for. In looking at the receptacle it may have had separate leads to each terminal rather than one multi-lead connector.
Date Submitted: 11/17/2015
Hello, Do you have a power cord that I can buy from Surplus Center that could be used for the 240 120 volt twist lock. or do I have to buy it somewhere else. Thanks, Peter
A: We do not have a cord with that end on it currently.
Date Submitted: 02/24/2014
Does it come with the back side plug? Or can it be purchased on this sight as well?
A: It is not furnished with the panel and not available from our company.
Date Submitted: 01/09/2014
Does it include a voltage regulator?
A: No this is just a connection box for a generator. Contains outlets and circuit breakers only.
Date Submitted: 12/14/2013
Do you have the plug in wiring harness to attach to these as per the photo?