6 Volt DC Solar Cell w/Mounting Bracket

Item Number: 22-1153

Price: $15.99
Back to top

6 Volt DC Solar Cell w/Mounting Bracket

6 Volt DC Solar Cell w/Mounting Bracket

item number: 22-1153 PRICE: $15.99 89 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 22-1153
6 Volt DC Solar Cell w/Mounting Bracket
Item Number: 22-1153
Price: $15.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Solar Cell

• New. 12" x 6" photovoltaic cell. Produces 1/2 watt, 6 volt DC open circuit in bright sunlight. Wire several in parallel for higher current or in series for higher voltage. Requires attachment of lead wires (not included) using electrical conductive adhesive to each edge on back side of cell. (See instructions). Comes with snap-together plastic frame mounting bracket. Overall size (assembled) 7-1/8" x 13-1/2" x 5/8". Shpg. 3 lbs.

More Specs
Click on boxes below for more information about this product.
InstructionsMore Specs
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 4

"Use a scotch brite pad to lightly rough up the area that your wires will connect to. This will remove some of the coating on the solar cell to help achieve a good connection. Connect your wires to any part of the shiny glass on the solar cell with a conductive adhesive. " This is an answer to the last question. However, any suggestions about what conductive adhesive is best. At least give some examples such as "Regular Clear PVC Cement".

A: There are a number of commercially available electrically conductive adhesives, epoxies, and glues available online or at a well-stocked electronics repair store. Consider the nature of the application and operating environment when choosing which to use.

Can I see what the electrical connections look like?

A: There are no electrical connections. The most reliable method is exposing the embedded wires on either side of the cell and fashioning connections in the most convenient way for your application.

There are no wires or terminals. How can it be wired in?

A: Any wires would have to be connected using electrically conductive paste or some mechanical pressure to either side of the back.

I just bought one of these and am totally baffled as to how to make it work. When it says "no wires on panel" on the advert that does not tell the complete story... There is absolutely NO way to connect wiring to this panel and get it to work. Its a plain sheet of glass with the solar element on it and thats it, no connectors or ANY way to make this work as a solar panel. Please tell me how to get this to work or I will be returning it.


Recently Viewed
Email a Friend
6 Volt DC Solar Cell w/Mounting Bracket
Item Number: 22-1153
Price: $15.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

6 Volt DC Solar Cell w/Mounting Bracket
Additional Comments:

Please wait...
Newsletter SignUp