12.5 KVA Bendix 51B8-3 115/230 Volt AC Generator

Item Number: 6-1017

Price: $199.99
TOP
Back to top

12.5 KVA Bendix 51B8-3 115/230 Volt AC Generator

12.5 KVA Bendix 51B8-3 115/230 Volt AC Generator

item number: 6-1017 PRICE: $199.99 150 In Stock Surplus Item


Must ship via Truck Freight
Please contact us for a quote
Calculate Shipping for Item 6-1017
12.5 KVA Bendix 51B8-3 115/230 Volt AC Generator
Item Number: 6-1017
Price: $199.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 158 of our current catalog
Description
12.5 kva 120/240 VAC GENERATOR

Removed From Service BENDIX CORPORATION part number 51B8-3 AC generator with external voltage regulator. Manufactured for the military for AC power. Four inch diameter air cooling tube. Lug terminal ouput with inputs for external voltage regulator. Regulator included. Wiring diagram not available.

SPECIFICATIONS
  • Power 12.5 kva
  • Voltage 120/240 VAC
  • Frequency 60 Hz
  • Phase Single
  • Power Factor 0.8-1.0
  • Power Requirement Minimum  25 HP gas engine
  • Amperage 52.1 amps
  • Speed 3600 RPM
  • Shaft Nominal 1-1/4" diameter 24T spline
  • Rotation CCW
  • Mount 12 hole on 10" bolt circle
  • Mounting Pilot Diameter 9"
  • Size 16-1/4" x 11" x 13"
  • Shpg. 160 lbs.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 14

Two questions: 1.) Does this unit come equipped with both a front and rear bearing? I.E. is the shaft end supported by a bearing that is not visible in the pictures? 2.) Can you tell if the rotor can be easily removed from this unit for machining? I.E. without having to extract press-fit parts or welds? Thanks.

A: We do not have a nonfunctional unit to tear apart to answer those questions, unfortunately.

Where is the FAQ for 6-1017

A: At the bottom of the item's web page in the 'Ask A Question' section. All questions posed and answered will appear there.

What's the frame number?

A: These were for a specific OEM application and do not adhere to NEMA frame coding.

What is the length of the shaft splines. FYI a place to find a 1.25 in. 24 T spline slip yoke is dennysdriveshaft.com Dana Spicer 2005008 Companion Flange 24 Spline NEAPCO N3-4-JK04 Pinion Yoke 24 Spline 1350 series

A: The spline length is 1-1/16".

How many teeth on the gear? do you carry A coupler to fit the gear?

A: It is a 24 tooth spline shaft. We do not carry a coupler to mate to it.

can the gen. be hooked up to a bldg. with just the gen and not the cables, only using the to power lugs on top. can you buy the cable ?

A: We do not have any wiring information regarding this generator. We have no access to the cable.

What end of the generator is the CCW rotation viewed from?

A: The direction is looking directly at the end of the shaft.

Can you guys provide / upload picture of the regulator. What is the part number of the regulator?

A: The part number is 20B123-1, by Bendix's Electric Power Division. (That division does not appear to exist any longer)

Is the regulator included and wiring between the regulator and generator?

A: The voltage regulator is included but not the cable with plugs at each end to connect to the generator.

About a bearing ? is there room on the shaft for a bearing and a drive gear ? If so what type would you recomend

A: The most common drive method would be using a jackshaft that is supported by bearings at each end and then directly coupled to the generator shaft.

can you adapt this generator to operate with a pto on a tractor

A: It would be necessary to use a speed increaser to bring the PTO up to 3600 RPM and then provide a bearing at the shaft end of the generator.

Is the regulator included?

A: Yes.

1-What is the rated amps @ 120vac? 2- Is it Brushless? 3- What is the Surge Watts? 4- what is the RPM required to produce the proper wattage or the proper Hz/Voltage? 5-What HP/CC: required produce the proper wattage or the proper Hz/Voltage?

A: At 120 Volts the amperage would be approximately 100. It uses brushes. Sorry no info on any surge capacity. It is to be driven at 3600 RPM. As a general rule it take 2 engine HP for each KW of power developed. So approximately 25 HP for full output.

Is the shaft or the gear 1.25 inch? Does the gear come off or is it part of the shaft?

A: The gear is part of the shaft. The 1.25 is the outside diameter of the gear.

Recently Viewed
Email a Friend
12.5 KVA Bendix 51B8-3 115/230 Volt AC Generator
Item Number: 6-1017
Price: $199.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

12.5 KVA Bendix 51B8-3 115/230 Volt AC Generator
Additional Comments:

Please wait...
Newsletter SignUp