12 VDC REVERSING WIRELESS REMOTE CONTROL Brand new. GLIDEFORCE wireless remote control to reverse polarity to equipment. Ideal for linear actuators or other permanent magnet motors. Waterproof receiver. Remotes have 2 buttons to control output. Code learning button on receiver with LED indicator. Very low current draw in standby. Heavy duty leads. High power radio gives over 100 foot range with a clear line of sight. Includes two keychain remote transmitters. SPECIFICATIONS
i want to fire a double acting dual solenoid valve with this remote. could i ground one side of each solenoid and just use the hot side of the wire when it reverse polarity?
A: We have not had customers use this in that application before and cannot say. This was meant to provide reverse polarity to permanent magnet DC motor.
Date Submitted: 04/02/2018
What is the size of the battery for the remote? Thanks
A: They use the LR23A 12V cells.
Date Submitted: 02/20/2018
I would like to use this on a windlass to bring up anchor It has two solenoids one for up and one for down. Do you think this would do the job?
A: No. This controller reverses polarity and will not work properly to fire two solenoids.
Date Submitted: 12/04/2017
Will the remotes stay paired with the transmitter if the unit is powered down for an extended time?
A: Yes. They come paired to the transmitter out of the box, and operate when powered after being on the shelf disconnected from any power source for significant periods of time.
Date Submitted: 03/03/2017
Is there any chance of just ordering 2 extra remotes for this? We have the motor and 2 remotes but we would like 2 more.
A: Unfortunately, no. Extra remotes are unavailable from this vendor.
Date Submitted: 06/16/2016
If I order 2 units will all remotes work on both recievers?
A: If you went through and paired the second set of transmitters with each receiver, then you could have two units that would work with either set of transmitters. Each receiver can pair with up to 4 transmitters.
Date Submitted: 02/28/2016
I assume there is 2 remotes to do the same thing?
A: Both remotes are identical.
Date Submitted: 02/09/2016
Is the action of the 40 amp. ;motor reversing wireless controller (item 11-3395) momentary for a push on either of the two buttons on the remote, or does the direction called for stay "locked in" until the alternate direction button is pressed. Momentary only seems the most logical but one isn't sure until the question is asked & answered. Thanks in advance for the answer. Bill Newbury, Mentor, Ohio
A: It is momentary. As long as a button is held down the motor will run the corresponding direction. With neither button pushed the motor is off.