Momentary 2 Button Pendant Switch w/14 Foot Cord PSN-020

Item Number: 11-2201

Price: $33.25
Back to top

Momentary 2 Button Pendant Switch w/14 Foot Cord PSN-020

Momentary 2 Button Pendant Switch w/14 Foot Cord PSN-020

item number: 11-2201 PRICE: $33.25 79 In Stock Regular Stock Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 11-2201
Momentary 2 Button Pendant Switch w/14 Foot Cord PSN-020
Item Number: 11-2201
Price: $33.25
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 153 of our current catalog
Brand new. Handheld two button momentary pendant switch. Normally open contacts rated 5 Amps at 250 volt AC.  For power-up, gravity down powerpacks (single acting).  Weatherproof plastic housing with hanging loop and 2 magnets on the back of the pendant.  Ideal for remote control of winches, hoists, hydraulic power units, etc.

  • Pushbuttons (2) Normally open
  • Cord 18/3, 14 feet long
  • Contact Rating 5 Amp, 250 Volts AC
  • Wires 3 wires with ring terminals
  • Size 2-1/8" x 2-5/8" x 6"
  • Shpg. 3 lbs.
More Specs
Click on boxes below for more information about this product.
Wiring DiagramMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 9

Will this work on a Single Acting Auto Hoist Hyd Power Unit?

A: Yes this will work with a single acting power unit.

I want to order this but, can you tell me what brand it is and how many wires does it have?

A: The current stock is marked Dalton PSN-020M. There are three wires.

Would this work with 9-6136 solenoid to control it for a grapple cylinder on a tractor? If so would I need anything else to wire in this switch?

A: It would function, but the contacts aren't rated for the 3.5 A 12 VDC current the coils will take. They are rated for 5 A 250 VAC. DC power will degrade the contacts faster than if used with the proper current/voltage, but will still have a relatively acceptable service life.

does this have a 4 terninal plug on it

A: It does not. It has three separate wires, each with a ring terminal.

What are the overall dimensions of the plastic housing.

A: As oriented buttons up, cord to the right- 6" wide, 2-1/8" tall, 2-5/8" deep.

Will this work on a dump trailer w/12 volt system & is it waterproof ?

A: Yes, these have worked on 12 VDC dump trailer power units before, and while the case is water and dust resistant, it is not waterproof. It has survived out in the weather for a number of customers, but I would not submerge it.

What switch will work best to operate a traveler 4500 winch in line with your 150 amp reversing solenoid switch item # 11-3149

A: This switch would be ideal for giving you a handheld remote pendant to operate the 11-3149.

Will the item 22-1101 Work with Item 9-7990 To control a DA cylinder? Thank you, Mark

A: Yes these two items could be used together

Hi, I am looking for an up/down momentary remote hand held switch to control a 12 volt DC powered windlass on my boat . THe windlass is controlled by foot switches at present which will remain in place. I need to control the windlass (powered) both up and down.I imagine this switch will control solenoids which the foot switches control now. Which on of your switches will do this job? thanks, Ray

A: The 11-2201 will work just fine for you. It has a common input and then connects to each of the outputs individually as the buttons are pressed.

Recently Viewed
Email a Friend
Momentary 2 Button Pendant Switch w/14 Foot Cord PSN-020
Item Number: 11-2201
Price: $33.25
Message for your friend:

I found this on the Surplus Center website, I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

Momentary 2 Button Pendant Switch w/14 Foot Cord PSN-020
Additional Comments:

Please wait...