Pendant PB Remote Control For 9-1480 SPX KG-12

Item Number: 9-1441-D

Price: $51.50
TOP
Back to top

Pendant PB Remote Control For 9-1480 SPX KG-12

Pendant PB Remote Control For 9-1480 SPX KG-12

item number: 9-1441-D PRICE: $51.50 57 In Stock Regular Stock Item



Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-1441-D
Pendant PB Remote Control For 9-1480 SPX KG-12
Item Number: 9-1441-D
Price: $51.50
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 38 of our current catalog
Description
Hand Held Remote Control
Brand new two pushbutton hand held control made for use with our items 9-1480 and 9-7413 hydraulic power packs for double acting cylinders. Magnets on back for mounting to steel surfaces. 10 foot power cord. Shpg. 4 lbs.



California
Residents
Prop 65 Warning WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

More Specs

MORE INFO

Click to view...



Click on boxes below for more information about this product.
Wiring DiagramMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 4

What remote do I use with a AC powered 110/220 power unit?

A: Because you are applying power only to the directional solenoids, and the motor would have it's own power switch, you can use a SPDT toggle switch, or items 9-1441-S and 11-2201 will both work as a pendant switch for that.

Can this be used on a 12 volt system for a dump trailer?

A: It depends on what the switch arrangement required is. This runs the motor and actuates the valve solenoid when raising and runs the motor only when lowering. If you need to run the motor to raise and then just power the solenoid to lower (motor not running) then the 9-1441-S would be more suitable.

I HAVE A DOUBLE ACTING RAM,ON A HYD DUMP TRAILER. I HAVE FOUR WIRES THIS SHOWES ONLY 3 BUT SAID IT WAS FOR A DOUBLE ACTING.??PLEASE EXPLAINE .THANKS SAM

A: This is for a power unit where the motor is powered for both extending and retracting plus the hydraulic cartridge valve is powered when retracting. One wire is common, one goes to motor solenoid and the third to the cartridge. Contacts in switch send power to either motor alone or motor and cartridge depending on which button is pushed. If your old remote had 4 wires there may be a different mode of operation.

I would like to know if this control can be use with # 9-7138 power unit?

A: No these are only for use with the DC power units.

Recently Viewed
Email a Friend
Pendant PB Remote Control For 9-1480 SPX KG-12
Item Number: 9-1441-D
Price: $51.50
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

Pendant PB Remote Control For 9-1480 SPX KG-12
Additional Comments:

Please wait...
Newsletter SignUp