Shipping Notes: * UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
30 AMP 12 VDC REVERSING TOGGLE SWITCH Brand new, GLIDEFORCE momentary (spring to center off position) toggle switch with polarity reversing circuit. Use to reverse any permanent magnet DC motor. 4 terminals.
please advise country of origin for the following items: - 11-3334-A - 11-3250 - 11-3220 Thanks Pierre
A: Respectively: Taiwan, China, China.
Date Submitted: 08/08/2018
Will this work as a switch for a motorized mirror.
A: If the driving actuator for adjustment is a 12vdc permanent magnet motor which reverses direction by reversing polarity, then yes.
Date Submitted: 07/23/2018
What is the IP rating on this switch??
A: There is no published IP rating on this switch. It is not considered watertight or weatherproof.
Date Submitted: 03/24/2018
Will this work as a power recliner switch even though it is 30v DC?
A: Without knowing how the original switch is wired and it's functioning, we cannot say.
Date Submitted: 09/12/2017
Can i use this switch with your 5-1845-xx Series Linear Actuator to open and close a pull behind fertilizer spreader and if so will it stay open or closed until you activate the switch again? Thank you, Bill
A: Yes, we have had customers use these actuators for things like that before. They will stay in the position you leave them in, unless the load is so far beyond its rating it backdrives the screw.
Date Submitted: 03/10/2016
does this animal exist? 3-position switch. on-off-(on) must have four blade/screw connection reverse polarity on the momentary.
A: This switch is meant to reverse a permanent magnet motor by reversing the polarity of the DC voltage applied to the windings. It is spring centered to the middle off position. There are 6 terminals although 2 do not have any connection on them. There is a factory installed jumper across the back. The four terminals are two to DC power and two to the motors leads.