5 GALLON FUEL TANK New take-outs. Plastic fuel tank originally made for a riding lawn mower. Hose-barb in bottom of tank and vent in top of tank both have 1/4" O.D. hose-barb. Filler port is 1-5/8" I.D. with tethered, vented, screw-on cap.
Tank was originally made to sit in a supportive cradle mount (not included) and be held in place with straps over the top of tank.
can the bottom outlet valve be removed and replaced with a shutoff valve.
A: The bottom outlet is pressed in through and sealed with a grommet. It may be difficult to remove and convert to a shutoff valve.
Date Submitted: 12/13/2018
Is the ohms rating for the sending unit correct. Are the full and empty ohms ratings reversed? I am trying to find a Gage to work with this.
A: The information stated is correct.
Date Submitted: 03/15/2018
Can you use the rollover vent/vapor return as a fuel return for a diesel engine?
A: It appears to have a check valve which would eliminate that possibility.
Date Submitted: 01/26/2018
Will you ship to canada and do you take paypal?
A: We do ship to Canada and we do accept PayPal for some orders. Please contact our Customer Service department and they can provide an international quote.
Date Submitted: 01/17/2018
Is this suitable for off road diesel? Thanks.
A: This was originally intended for a small electric lawnmower with an onboard generator which consumed gasoline. It is plastic so it is likely that it will tolerate diesel, though we have no way to confirm it.
Date Submitted: 09/16/2017
Can I get the basic outside dimensions of the tank please?
A: This tank is 12 inches deep as it is being faced, with the fill cap upright. It is 14.5 inches wide, and 17 inches tall.