10 HP Briggs & Stratton Vanguard 19L232 0111F1AR1032 Engine

Item Number: 28-1864

Price: $299.95
TOP
Back to top

10 HP Briggs & Stratton Vanguard 19L232 0111F1AR1032 Engine

10 HP Briggs & Stratton Vanguard 19L232 0111F1AR1032 Engine

item number: 28-1864 PRICE: $299.95 61 In Stock Surplus Item
Prop 65 Warning WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov


calculate shipping
Calculate Shipping for Item 28-1864
10 HP Briggs & Stratton Vanguard 19L232 0111F1AR1032 Engine
Item Number: 28-1864
Price: $299.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 5 of our current catalog
Description


10 HP HORIZONTAL SHAFT BRIGGS & STRATTON RECOIL START ENGINE
New, BRIGGS & STRATTON Vanguard commercial series engine. Features include Dura-Bore cast iron cylinder sleeve, float carburetor for consistent easy starting, maintenance-free electronic ignition, low oil shutdown, overhead valves for cooler operation, Dual-Clean air cleaner, compression release for easy starting, engine mounted controls, accessory mount and TransportGuard fuel shut off to prevent fuel from diluting oil during transport. EPA compliant for all 50 states.

SPECIFICATIONS
  • Model 19L2320111F1AR1032
  • Power 10 HP
  • Bore/Stroke 3.12" x 2.44"
  • Disp. 18.61 cu. in (305 cc)
  • Speed 3600 RPM
  • Start Recoil
  • Shaft Horizontal
  • Shaft 1" diam. x 3-21/32" w/keyway tapped 7/16"-20
  • Accessory Mount 4 Bolt 3-5/8, 5" and 6-1/2" B.C.
  • Fuel Tank 3.8 qt. (3.6L)
  • Size 12-1/2" x 16-7/16" x 16"
  • Shpg. 75 lbs.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 13

will the engine fit my troy built chipper shredder it,s a CS 4210 model 183735.Thank you for your time

A: We have no information about that equipment and cannot say.

What are the measurements for the mounting bolts?

A: The base mounting pattern is approximately 7.75" x 3.375".

How high is the output shaft from the bottom of motor

A: The shaft centerline height is 4.25".

Do you guys have a hydraulic pump mount with a 4 bolt pump mount to fit and work with this motor with a pump with a 1.5" shaft?

A: With so few specifications we cannot say.

Is possible shipping for Italy? how much does it cost? Thanks!

A: We do ship worldwide. Please contact our Customer Service department with your order and shipping details and we can provide an international quote to you.

Is this a good engine for a go kart application? Our series requires no more than 10hp, and I want to Max out.

A: We cannot state the suitability of this item for that purpose. We can state that the throttle is friction detented and would need to be converted to spring action if used as such.

Does it have electric start

A: No, it does not.

Is this the engine that will be used for BAJA SAEINDIA 2018? Can someone help me to get the torque-speed curve of this engine?

A: We have no information regarding that competition. Power curves can usually be obtained from the manufacturer if the model information is provided to them.

what size is the keyway ?

A: The keyway is .25"

can this engine be used on a generator

A: Provided the generator is sized correctly to the engine, and the shaft is correct for the method of driving it, yes.

does this engine have a ball bearing supported crankshaft?

A: Yes, the shaft is supported by a ball bearing.

10 HP BRIGGS & STRATTON VANGUARD 19L232 0111F1AR1032 ENGINE Does above engine that you sell have any kind of ALTERNATOR for hooking up lights, etc. Thanks.

A: No it does not have any charging capability.

Can this engine be fitted with 120v electric starter?

A: Possibly this conversion could be done. You would have to check with Briggs & Stratton service dealer regarding this.

Recently Viewed
Email a Friend
10 HP Briggs & Stratton Vanguard 19L232 0111F1AR1032 Engine
Item Number: 28-1864
Price: $299.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

10 HP Briggs & Stratton Vanguard 19L232 0111F1AR1032 Engine
Additional Comments:

Please wait...
Newsletter SignUp