4.6 HP HORIZONTAL SHAFT HONDA GC160 RECOIL START ENGINE New, HONDA GC series horizontal shaft engine. Honda is the worlds largest manufacturer of engines and has earned its reputation for unsurpassed quality, performance and reliability. Engines feature overhead valves, ball bearing supported crankshaft, mechanical governor, electronic ignition and easy to use controls. Meets EPA and CARB emission regulations for all states.
Engine Family GX
Power 4.6 HP
Torque 6.9 ft-lbs
Disp. 160 cc
Speed 3600 RPM
Fuel Tank 1.9 quarts
Shaft 3/4" dia. x 2-7/16" keyed, tapped 5/16"-24 UNF
What is the shaft height from the base of the motor?
A: The shaft height from the center of the shaft to the base of the motor is 4 1/4 inches.
Date Submitted: 03/18/2019
Looking at the rear of the motor (your third photo) There are two holes or ports on the right near the rubber hose that are on a flange of sorts that are slightly different size. What are these port used for? Thanks
A: One is a threaded hole that does not go through, the other is an unthreaded hole that does go through. There is no specific purpose for them detailed.
Date Submitted: 08/12/2017
What size bolts and threads fit the 4 holes for the accessory mount?
A: The accessory mount holes are threaded 5/16-24.