208cc 5 HP Zongshen Engine 170-COA

Item Number: 28-1893

Price: $99.95
TOP
Back to top

208cc 5 HP Zongshen Engine 170-COA

208cc 5 HP Zongshen Engine 170-COA

item number: 28-1893 PRICE: $99.95 15 In Stock Surplus Item
Prop 65 Warning WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov


calculate shipping
Calculate Shipping for Item 28-1893
208cc 5 HP Zongshen Engine 170-COA
Item Number: 28-1893
Price: $99.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 6 of our current catalog
Description
208cc HORIZONTAL ENGINE
New, ZONGSHEN horizontal shaft engine with recoil starter. Manual choke and throttle control. Cast iron cylinder sleeve. Original application, chipper/shredder.

SPECIFICATIONS
  • Model 170-COA
  • Power 5 HP
  • Disp. 208 cc.
  • Speed 3600 RPM
  • Start Recoil
  • Shaft Horizontal
  • Shaft Special MTD Chipper/Shredder
    25mm dia. x 1-5/16", tapered to 7/8" dia. x 1" w/3/16" keyway
    Overall length 2.96", tapped 3/8-24
  • Mount 3-1/8" x 6-3/8"
  • Accessory Mount 4 bolt, 3-5/8" bolt circle
  • Fuel Tank Yes 3 quarts
  • Size 18" x 10-1/4" x 13-1/2"
  • Actual Weight 35 lbs.
  • Dimensional Shpg. 48 lbs.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 11

Does this motor have reduction ratio and if so what is it?

A: No this engine does not have a reduction ratio.

Describe the shaft.

A: Shaft : 25mm dia. x 1-5/16", tapered to 7/8" dia. x 1" w/3/16" keyway Overall length 2.96", tapped 3/8-24

does this have reverse

A: No. This only has the output shaft, which turns CCW as facing into it.

IS THIS ENGINE CONSIDER A 1000 HR ENGINE?

A: The normal lifespan of these engines was not provided to us and is not known.

EPA approved only, meaning you can't sell to California?

A: Correct. This engine in not CARB compliant and cannot be sold to/in California.

What is the shaft rotation direction?

A: The shaft rotation is CCW as facing the shaft.

Is the gas tank plastic

A: No, the tank is metal.

This diesel engine is not firing, therefore will not start. Can you help.

A: This is not a diesel engine, it is meant to be used with gasoline. Please contact our Product Support Department to discuss further.

Do you know if this has the same taper as the 247.776350 (craftsman / mtd) chipper?

A: We have no information regarding that unit or the compatibility thereof.

Is this still available?

A: Yes, as of this time we have 85 in stock.

Is this a carb/epa compliant engine?

A: It is EPA compliant only.

Recently Viewed
Email a Friend
208cc 5 HP Zongshen Engine 170-COA
Item Number: 28-1893
Price: $99.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

208cc 5 HP Zongshen Engine 170-COA
Additional Comments:

Please wait...
Newsletter SignUp