420cc 21 Gross Torque Briggs & Stratton Engine 25T232

Item Number: 28-1901

Price: $399.95
TOP
Back to top

420cc 21 Gross Torque Briggs & Stratton Engine 25T232

420cc 21 Gross Torque Briggs & Stratton Engine 25T232

item number: 28-1901 PRICE: $399.95 9 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 28-1901
420cc 21 Gross Torque Briggs & Stratton Engine 25T232
Item Number: 28-1901
Price: $399.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 5 of our current catalog
Description
21 TORQUE BRIGGS & STRATTON ENGINE
New BRIGGS & STRATTON model 25T232-0118-F1 hoizontal crankshaft engine. Features cast iron cylinder sleeve, dual ball bearings. Manual choke and throttle. Steel muffler guard.

SPECIFICATIONS
  • Model 25T232-0118-F1
  • Engine Family DJDGS.4202UA
  • Torque 21 Ft-lbs.
  • Horsepower 14.4 HP calculated
  • Disp. 420 cc.
  • Speed 3600 RPM
  • Start Recoil
  • Shaft Horizontal
  • Shaft 1" dia. x 3-31/64" w/1/4" keyway, tapped 7/16-24.
  • Base Mount 7-5/8" x 4-1/2"
  • Accessory Mount 6-1/2" bolt circle with 5-3/4" pilot
  • Fuel Tank 6.6 liter
  • Size 18" x 14-1/2" x 19"
  • Actual Weight 73 lbs.
  • Dimensional Shpg. 85 lbs.


California
Residents
Prop 65 Warning WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 5

What is the rotation of the shaft? Is there a 12v electric starter for this motor?

A: The rotation of the shaft on this engine is clockwise. We do not have an electric starter for this engine.

Can engine #28-1901 be installed on a large Go cart.

A: This engine has a friction detented throttle which may not work well with that type of application. We cannot state suitability beyond that.

Can I install this on a big go cart.

A: That depends on the HP you require.

To the last question and anyone else- Kind of a silly question. Even if the person answering has machinery's handbook in front of him and is willing to calculate required hp, you don't specify anything useful about the pump. 2 stage? Rated cfm@psi? In general you would probably be ok HP wise if replacing a 7.5hp electric electric motor or similar HP gas engine. This engine is good for about 24cfm@175psi.

A:

will this power a 4 cylinder air compressor with 18 inch flywheel at 800 rpm with unloader and throtle control thanks

A: This engine is rated for 14.4 Hp (calculated). If the compressor's power demand is equal to or lesser than that in your application, there should be no issue.

Recently Viewed
Email a Friend
420cc 21 Gross Torque Briggs & Stratton Engine 25T232
Item Number: 28-1901
Price: $399.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

420cc 21 Gross Torque Briggs & Stratton Engine 25T232
Additional Comments:

Please wait...
Newsletter SignUp