I have a tractor with a closed center system. I want to run 6 individual da cylinder circuits with 1 tractor valve locked in an output position. Do i need open or closed center subplates and valves? Can I hook 2- 3 valve subplates in series?
A: If your system is Closed Center, you would need to purchase Closed Center subplates. (9-4070- series). There is no power beyond conversion for these, but it should be possible to connect outlet to inlet in this case and string blocks together, as the outlet ports are rated for the full pressure of the inlet.
Date Submitted: 12/20/2018
What is the part number for the cover-plate for non used solenoid ports?
A: We do not carry a cover plate for unused solenoid ports.
Date Submitted: 07/25/2016
is there a power beyond conversion fitting that goes with this item? I need to put several of these in series.
A: There is no power beyond conversion for these, but it should be possible to connect outlet to inlet in this case and string a few blocks together. Because these are for series applications, the pressure across all the spools will be distributed evenly, so using multiple functions at once will lower the usable pressure for all functions.