Will this sub plate work with swh-g03-c6-d12-10-n By northernman?
A: We cannot cross the specs of your valve, however any valve with a D05 subplate pattern should work with this product.
Date Submitted: 01/25/2019
Can a 9-6136 Hydraulic Solenoid valve be used with the D05 Sub plate?
A: No, the footprint and mounting for D03 and D05 are not compatible.
Date Submitted: 12/14/2018
The D05 sub plate, can it be used on a solenoid with an open center? Thanks
A: Yes, it can be.
Date Submitted: 10/30/2018
What are the size of the ports on d05 compared to d03?
A: There is no standard for what size ports the sub-plate can be tapped for. Frequently, 1/2" NPT or SAE can be found on D05 subplates, but many other sizes are available.
Date Submitted: 09/14/2017
What is D05 mounting?
A: D05 refers to a standardized set of mounting dimensions for modular solenoid control valves. If you view the additional information in the lower right hand corner of the web page for this item, you will see a diagram of the location of the various holes.
Date Submitted: 04/18/2016
What solonoid goes with 9-4175 subplate ?
A: Any valve with a D05 pattern. Right now this is only item 9-8452.
Date Submitted: 05/23/2015
what is the gpm rating on this sub plate? j
A: DO5 subplates like this should be used with a maximum flow of 20 GPM.
Date Submitted: 01/08/2014
Is the plate series or parallel?
A: Because this is a single station plate, and there are no other spools connected to the pressure and return galleys, it isn't necessary to differentiate.