1.5x6x0.75 Hyflow Controls DA Hydraulic Cylinder

Item Number: 9-8841

Price: $49.99
Back to top

1.5x6x0.75 Hyflow Controls DA Hydraulic Cylinder

1.5x6x0.75 Hyflow Controls DA Hydraulic Cylinder

item number: 9-8841 PRICE: $49.99 1921 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-8841
1.5x6x0.75 Hyflow Controls DA Hydraulic Cylinder
Item Number: 9-8841
Price: $49.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 60 of our current catalog
1-1/2" x 6" x 3/4" DA HYDRAULIC CYLINDER
New. HYFLOW CONTROLS welded cylinder with thread-in gland cap.

  • Double Acting
  • Bore x Stroke 1-1/2" x 6"
  • Barrel Thickness 3/16"
  • Pressure 3000 PSI max.
  • Rod Dia. 3/4"
  • Ports SAE 6
  • Retracted Length 13"
  • Shpg. 8 lbs.
  • Rod End Weld-on Clevis
  • Outside Width 1-1/2"
  • Inside Width 3/4"
  • Throat Depth 1-1/16"
  • Pin Hole 1/2"
  • Base End Weld-on Clevis
  • Outside Width 1-1/2"
  • Inside Width 3/4"
  • Throat Depth 1-7/16"
  • Pin Hole 1/2"
More Specs
Links To More Info On This Item
Click to view...

Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 7

Specs say SAE 6 ports diagram says 9/16 ORB. Which are they?

A: The 9/16-18 is the thread size. This cylinder uses SAE 6.

Are the SAE 6 sized ports on this cylinder JIC 45 O-Ring or JIC 37?

A: They are SAE 6 oring. Not JIC

What is the manufacturer part number for this part?

A: The manufacturer part number is: Unverferth TA0-904623-0.

Would you have a similar cylinder with a tang or threaded rod end?

A: No, we do not. The similar items we currently offer have crosstube, swivel eye, or pinhole rods.

Dear Sirs : I need a Cylinder like that, (HYFLOW CONTROLS DOUBLE ACTING HYDRAULIC CYLINDER 1.5x6x1.75 9-8841 )but 8" STROKE, it is available ? How much it cost ? What is the Diameter External of this Cylinder ? Regards, Fernando :.

A: We do not carry an 8" stroke version of this cylinder. The closest things similar are 9-8776-8 and 9-8776-8-S. The barrel o.d. of this cylinder is 1.875"

Where are they made?

A: These cylinders are Chinese in origin.

Would this work to raise and lower a four way wedge on a log splitter I am building. The wedge setup weighs around seventy five pounds

A: As long as the cylinder rod is protected from side load, that is well within its capability.

Recently Viewed
Email a Friend
1.5x6x0.75 Hyflow Controls DA Hydraulic Cylinder
Item Number: 9-8841
Price: $49.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.5x6x0.75 Hyflow Controls DA Hydraulic Cylinder
Additional Comments:

Please wait...
Newsletter SignUp