1.625x47.5x1.375 DA Hydraulic Cylinder w/ Solenoid Valve

1.625" x 47.5" x 1.375" DA HYDRAULIC CYLINDER w/ SOLENOID VALVE
New, Welded cylinder. Valve block at base end of cylinder includes one HYDRAFORCE model SV08-20J 2-way, normally-closed, poppet valve with 10 VDC solenoid and manual over-ride operator. Valve must be in open position for cylinder to retract.
9" x 4-1/2" x 3/16" thick guard plate protects solenoid valve.
Steel plate measuring 8" x 5-1/2" x 1" thick welded to side of valve block has four bolt holes tapped 1/2"-13 x 1-1/4" deep. Two tapped holes per side on 4-1/2" centers.
Rod end is stepped down to 1" O.D. for last 1-1/4" of length with 1/4" wide x 1/8" deep groove centered 3/4" from end of rod. Retracted length measured from base end to rod pin center.

SPECIFICATIONS
Double Acting Bore x Stroke 1-5/8" x 47-1/2" Barrel Thickness 3/16" Pressure 2000 PSI max. Rod Dia. 1-3/8"	Ports SAE 4 Retracted Length 69-5/8" Shpg. 80 lbs.

END MOUNTINGS
Rod End Stepped Thru-Hole Width 1-3/8", See Paragraph Pin Center to Rod End 1-5/8" Pin Hole 1/2"	Base End Steel Plate With Four Tapped Holes Plate Dims 8" x 5-1/2" x 1" thick Four Tapped Holes 1/2"-13 x 1-1/4" deep Tapped Hole Centers 4-1/2"