1x6x0.625 DA Hydraulic Cylinder Swivel Eyes

Item Number: 9-7257-6

Price: $101.05
Back to top

1x6x0.625 DA Hydraulic Cylinder Swivel Eyes

1x6x0.625 DA Hydraulic Cylinder Swivel Eyes

item number: 9-7257-6 PRICE: $101.05 7 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 9-7257-6
1x6x0.625 DA Hydraulic Cylinder Swivel Eyes
Item Number: 9-7257-6
Price: $101.05
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 61 of our current catalog

You may also consider:

Brand new, welded cylinder with wire-lock gland retainer. Swivel ball joints at both ends allow for angular motion.

  • Double acting
  • Bore x stroke 1" x 6"
  • PSI max. 3,000
  • Rod dia. 5/8"

  • Ports SAE 6
  • Retracted length 12"
  • Shpg. 5 lbs.
  • Rod end swivel-ball
  • Ball width 1"
  • Ball O.D. 2"
  • Pin hole 1/2"

  • Base end swivel-ball
  • Ball width 1"
  • Ball O.D. 2"
  • Pin hole 1/2"
More Specs


Click to view...

Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 5

Hi I need 2 pistons 4 inch stroke and the have to hold the load these at for a trawl winch

A: We have a few different cylinders with a 4" stroke. You can narrow your search on our website.

Can I use air not oil

A: Because it was not designed for use with air, we cannot guarantee correct operation if used as such; and cannot recommend it. Other customers have done so with varying results.


A: We have no way to order them with a different pinhole, no.

Why does not any of these cylinder have load rated?

A: There is a force calculator in the Technical Help section of our website. Keep in mind this will only provide theoretical max force for a given bore and pressure without accounting for column load restrictions (if applicable).

Is the Rod end threaded or welded on?

A: It is welded on.

Recently Viewed

You may also consider:

Email a Friend
1x6x0.625 DA Hydraulic Cylinder Swivel Eyes
Item Number: 9-7257-6
Price: $101.05
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1x6x0.625 DA Hydraulic Cylinder Swivel Eyes
Additional Comments:

Please wait...
Newsletter SignUp