2.5x32x1.5 DA HYD CYL WOLVERINE WWXT2532-S
Brand new. WOLVERINE by PRINCE welded, double-acting crosstube cylinder with thread-in gland cap, rated for 3000 PSI. High-quality cylinders that are 100% tested for quality assurance. Features include North American-sourced seals, hard chromed rod, cast steel ends with grease zerks, O-ring top ports, and high luster black paint.
I have an international harvester 2000 loader from the early 70’s with a lift cylinder that is 2.5”x 33 3/4”stroke x 1.5” rod. I don’t need to lift my bucket vertical and was wondering if this would be a relatively close product... the only thing I would really have to measure would be pin size and slots where the ends would slide in to. Is there anything else I should be looking at before choosing a replacement
A: This does appear to be similar to what you describe needing to replace. Double check: Pin size, clearance in regard to crosstube width at base and rod, pivot clearance for base of the cylinder tube, port orientation and clearance of same in projected range of motion, and anything else that could prevent reliable use of the product.