2" x 12" x 1.25" DA HYDRAULIC CYLINDER
New. Welded cylinder with thread-in gland cap. Schramm Inc Model# 2813-0381. 3" x 5" x 1.25" mounting block welded to barrel with two holes tapped 5/8"-11 x 1-11/16" deep. HP1048F 101107 30381 stamped on mounting block. Retracted length measured from base end to rod pin center.
SPECIFICATIONS
|
- Double Acting
- Bore x Stroke 2" x 12"
- Barrel Thickness 1/4"
- Pressure 3000 PSI max.
- Rod Dia. 1-1/4"
|
- Ports 1/4" NPT
- Retracted Length 16-7/8"
- Shpg. 19 lbs.
|
END MOUNTINGS |
|
- Rod End Crosstube
- Width 1-1/8"
- O.D. 2-1/4"
- Pin Hole 1"
|
- Mounting Block
- Dimensions 3" x 5" x 1-1/4"
- Mounting Holes Two 5/8"-11 Tapped Holes
- Mounting Hole Depth 1-11/16"
|