3.5" x 32.5" x 1.875" DA HYDRAULIC CYLINDER
Unused, old inventory. Welded cylinder with bolt-on gland retainer. Two-bolt flange ports with 13 mm orifices. Flange mounting bolt holes tapped M8-1.25. Flange bolt centers measure 1.965"/2.31" retract/extend respectively. Trunnion pins tapped metric M10-1.0.
SPECIFICATIONS
|
- Double Acting
- Bore x Stroke 3-1/2" x 32-1/2"
- Barrel Thickness 1/4"
- Pressure 3000 PSI max.
- Rod Dia. 1-7/8"
|
- Ports 2 Bolt Flange
- Retracted Length 22-3/4"
- Shpg. 114 lbs.
|
END MOUNTINGS |
|
- Rod End Tang w/ Swivel Eye
- Max Thickness 2-9/32"
- Pin Center to Tang End 2-3/8"
- Pin Hole 40mm
|
- Trunnion Male
- Pin Outside Width 7-3/4"
- Pin Inside Width 4-3/4"
- Pin Center to Rod Pin Center 22-3/4"
- Pin Center to Base End 23-3/8"
- Pin Diameter 42mm
|