3" x 15" x 1.5" DA HYDRAULIC CYLINDER
Unused, old inventory. Welded cylinder with thread-in gland cap. Cartridge block at base end of cylinder has two SAE 4 ports in top, one SAE 4 port in bottom, and one SAE 6 port facing rod end of barrel. Requires addition of one pilot-operated check valve (not included). Transfer tube to retract port. Cylinder features additional 3-1/4" wide crosstube with 1/2" O.D. and 11/32" I.D. welded to rod end crosstube, offset 45° towards barrel.
SPECIFICATIONS
|
- Double Acting
- Bore x Stroke 3" x 15"
- Barrel Thickness 1/4"
- Pressure 3000 PSI max.
- Rod Dia. 1-1/2"
|
- Ports SAE 4/6, See Above
- Retracted Length 28-3/4"
- Shpg. 47 lbs.
|
END MOUNTINGS |
|
- Rod End Crosstube
- Width 4-5/8"
- O.D. 1-7/8"
- Pin Hole 1-1/4"
|
- Base End Crosstube
- Width 3-5/16"
- O.D. 1-7/8"
- Pin Hole 1-1/4"
|