3x8x1.5 DA Hydraulic Cylinder Top Link Self Align Both Ends

Item Number: 9-5152

Price: $246.00
TOP
Back to top

3x8x1.5 DA Hydraulic Cylinder Top Link Self Align Both Ends

3x8x1.5 DA Hydraulic Cylinder Top Link Self Align Both Ends

item number: 9-5152 PRICE: $246.00 72 In Stock Regular Stock Item


calculate shipping
Calculate Shipping for Item 9-5152
3x8x1.5 DA Hydraulic Cylinder Top Link Self Align Both Ends
Item Number: 9-5152
Price: $246.00
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 49 of our current catalog

You may also consider:

Description
3"x 8" x 1-1/2" TOP LINK DOUBLE ACTING CYLINDER
Brand new, Surplus Center private label cylinder. External gland for superior performance at high pressure. Self aligning swivel eye at each end.

SPECIFICATIONS
  • Double acting
  • Bore/stroke 3" x 8"
  • 3000 PSI
  • Rod diam. 1-1/2"
  • Ports 1/2" NPT
  • Retracted lgth. 19-1/2"
  • Swivel eye ends 1-3/4" wide
  • Pin holes 1"
  • Shpg. 27 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 6

How thick is the main rod end that holds the 1 3/4" swivel ball?

A: That 1.75" dimension is the through-bore width of the 1" diameter pin hole in the swivel ball on either end.

Will this work on a Case IH 315 tractor

A: This is made to be compatible with Category 2 three-point hitch top links. It doesn't appear that equipment is in that category.

Should I consider a check valve kit if one of the uses is a very heavy 6 foot rotary cutter to avoid drift? (I have heard that check valves make fine adjustments difficult)

A: Customers typically do not inquire about check valve kits for use with these cylinders when purchasing.

What is the pin size? I need a cat 1 pin on the tractor side and cat 2 eyelet on the implement side for a Kubota M6800.

A: These cylinders have a 1" dia. pin at each end.

On your Hydraulic top link #9-5152 is the stoke Lenght of 8" the amount I would have to add to the closed length of 19.5" to = 27.5 total length?

A: Yes the stroke is added to the retracted length to get the extended length. This is measured from pin center to pin center.

when hydralic cylinders say "retracted length" you are measuring from center to center of pins Correct?

A: Yes, the retracted length is measured from pin center to pin center.

Recently Viewed

You may also consider:

Email a Friend
3x8x1.5 DA Hydraulic Cylinder Top Link Self Align Both Ends
Item Number: 9-5152
Price: $246.00
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3x8x1.5 DA Hydraulic Cylinder Top Link Self Align Both Ends
Additional Comments:

Please wait...
Newsletter SignUp