3"x 8" x 1-1/2" TOP LINK CYLINDER Brand new. Use in place of top link on three point hitches on tractors to adjust implement. Double swivel adapter on base of cylinder to provide vertical and horizontal movement of hitch. SPECIFICATIONS
Can the pivot block on item 9-5196 be gotten seperately?
A: As item 9-5180-A, yes. It is not available on the website, though.
Date Submitted: 05/20/2018
Do you still carry the fixed end clevis adapter, part 9-5180-A?
A: We do.
Date Submitted: 05/18/2018
what is the extended length center of eye to center of eye?
A: With the pivot block installed, the extended length will be 30".
Date Submitted: 05/30/2017
You list the retracted length as 22 inches. Is that to the rear hole in the swivel block or to the hole in the clevis on the back of the cylinder? Thanks!
A: That is the retracted length as advertised with the pivot block installed.
Date Submitted: 03/08/2017
What are the inside and outside measurements for the Cleve's on the base end
A: The outside width is 2.625". The inside width is 1.125".
Date Submitted: 05/27/2016
Is there a seal kit available for Item#9-5196?
A: Yes. Item # 9-5152-KIT will work for this cylinder as well.
Date Submitted: 04/19/2016
Can you make this cylinder with 10 inches of travel?
A: This cylinder is only available as advertised. A couple of possibilities is adding the fixed end clevis adapter to a standard cylinder. The adapter is part 9-5180-A. We also have 3x10 cylinders with a swivel eye at each end, see item 9-7261-8.