4.5x32x2 3000 PSI DA Hydraulic Cylinder

Item Number: 9-7516

Price: $449.95
TOP
Back to top

4.5x32x2 3000 PSI DA Hydraulic Cylinder

4.5x32x2 3000 PSI DA Hydraulic Cylinder

item number: 9-7516 PRICE: $449.95 38 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 9-7516
4.5x32x2 3000 PSI DA Hydraulic Cylinder
Item Number: 9-7516
Price: $449.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 74 of our current catalog
Description
4-1/2" X 32" X 2" DA WELDED HYD CYL
Surplus, welded cylinder with thread-in gland.

SPECIFICATIONS
  • Double Acting
  • Bore x Stroke 4-1/2" x 32"
  • Pressure 3000 PSI max.
  • Rod Dia. 2"
  • Ports SAE 16
  • Retracted Length 54-1/2"
  • Shpg. 145 lbs.
END MOUNTINGS  
  • Rod End Tang
  • Outside Width 2-3/4"
  • Pin Hole 2"
  • Base End Tang
  • Outside Width 2-3/4"
  • Pin Hole 2"
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 2

Something does not add up... with a 32 inch stroke it does not make sense that this has a 54.5 inch retracted length.. your picture sure does not show 20 inches of Tang... could the person measuring it have reversed the numbers and it is a 45.5 inch retracted length?? can someone lay a tap measure on this cylinder? Thank you

A: All measurements are correct. There has to be stroke limiting block inside the cylinder. It does only extend 32 inches.

Is the Retracted Length of 54-1/2" the overall length or is it the center to center on the pins dimension. Thank you Joe

A: Retraced length is from pin center to pin center when the cylinder is fully closed.

Recently Viewed
Email a Friend
4.5x32x2 3000 PSI DA Hydraulic Cylinder
Item Number: 9-7516
Price: $449.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

4.5x32x2 3000 PSI DA Hydraulic Cylinder
Additional Comments:

Please wait...
Newsletter SignUp