4" x 36" x 2.5" DA HYDRAULIC CYLINDER
Unused, old inventory. Welded cylinder with thread-in gland cap. Seitz Mfg Co Inc. Transfer tubes to retract port and extend port. 8" x 8" x 1-1/4" four bolt mounting flange on rod end of barrel with 3/4" holes on 6" x 6" centers. Base end of cylinder tapped 1/2"-13 x 1" deep.
SPECIFICATIONS
|
- Double Acting
- Bore x Stroke 4" x 36"
- Barrel Thickness 1/4"
- Pressure 3000 PSI max.
- Rod Dia. 2-1/2"
|
- Ports 1/2" NPT
- Retracted Length 45-1/2"
- Shpg. 210 lbs.
|
END MOUNTINGS |
|
- Rod End Thru-Hole
- Width 2-1/2"
- Pin Center to Rod End 1-7/16"
- Pin Hole 1"
|
- Mounting Flange
- Flange Dimensions 8" x 8" x 1-1/4"
- Mounting Holes 3/4" diameter on 6" x 6" centers
|