2.5" x 10" x 1.5" DOUBLE ROD CYLINDER Brand new double rod, steering type hydraulic cylinder. Both rod ends are drilled and tapped to accept a standard 3/4"-16 tie rod end. A pair of 1" thick steel mounting blocks are welded to cylinder body.
Double acting, double rod
Bore x stroke 2.5" x 10"
PSI Max. 3,000
Rod Dia. 1.5"
Ports SAE 6
Retracted length 26-1/2" (measured from end of rod to end of rod)
Shpg. 26 lb.
Both Rod Ends Drilled and Tapped
Drilled 2-1/8" deep
Tapped 3/4"-16 x 1-5/8" deep
Wrench flats at rod ends
Cylinder Body Mount
Four bolt mount on 13.50" x 3.62" centers
Untapped mounting holes for 3/8" dia. socket head bolts
Saw where stock was supposed be 11/7/18. Not showing any stk of cylinders. When will they be available? Thanks
A: The updated due dates for the overdue shipments are 11/30 and 2/15.
Date Submitted: 11/09/2018
when will this cylinder be back in stock?
A: After consulting with our manufacturer yet again, we expect to have stock 11/7/18.
Date Submitted: 08/07/2018
This cylinder has a wire-lock retention on the gland. There is a square wire that can be rotated into position and extracted from the small recess in the tube near the rod. Once the wire has been extracted the gland should pull free. Ok I found the recess in the tube & I see a square lock that's keeping the end from unscrewing but how do you get it out. I am not sure what you mean wire.
A: Please contact our Product Support Department for the correct method of extracting a wire-lock.
Date Submitted: 07/06/2017
How does this cyl come apart? Thanks
A: This cylinder has a wire-lock retention on the gland. There is a square wire that can be rotated into position and extracted from the small recess in the tube near the rod. Once the wire has been extracted the gland should pull free.