2" x 10" x 1.25" DOUBLE ROD CYLINDER Brand new double rod, steering type hydraulic cylinder. Both rod ends are drilled and tapped to accept a standard 3/4"-16 tie rod end. A pair of 1" thick steel mounting blocks are welded to cylinder body.
Double acting, double rod
Bore x stroke 2" x 10"
PSI Max. 3,000
Rod Dia. 1.25"
Ports SAE 6
Retracted length 27" (measured from end of rod to end of rod)
Shpg. 24 lb.
Both Rod Ends Drilled and Tapped
Drilled 2-1/8" deep
Tapped 3/4"-16 x 1-5/8" deep
Wrench flats at rod ends
Cylinder Body Mount
Four bolt mount on 13.50" x 3.12" centers
Untapped mounting holes for 3/8" dia. socket head bolts
A: We currently have a shipment on order, due 4/06/18.
Date Submitted: 02/22/2018
I purchased a double ended ram where can i find clevis mounts that thread in to the ram if possible can i get a part number
A: We do not currently have any clevises that thread into the rod. We have swivel eye rod ends, but what we have is not strong enough for the forces the cylinder can generate.
Date Submitted: 03/29/2017
Is 9-6846 double acting cylinder a true in stock item. When I order I will have only about a week window for it to arrive in Thanks
A: As of 10/4/16, we have 19 in stock.
Date Submitted: 10/04/2016
How much is the maximum Force where can take this product?
A: At the 3,000 PSI maximum operating pressure the push in either direction is about 5,700 lbs.
Date Submitted: 03/22/2016
Hello, I have a questions of this cylinder. I want to connect the end of the cylinder with ball joint and can recognize what is the diameter of hole at the both end of cylinder?is the 3/4 " ?
A: Both ends of the rod are tapped 3/4"-16 x 1-5/8" deep.
Date Submitted: 03/16/2016
Is this a traditional double ended assist cylinder? Thus the end to end length from end of rod to end of rod remains constant and the rod just strokes left to right? In other wards when one rod goes in the other goes out? Thanks