1.5x12x1.5 SA Hydraulic Snowplow Cylinder

Item Number: 9-8526

Price: $64.95
Back to top

1.5x12x1.5 SA Hydraulic Snowplow Cylinder

1.5x12x1.5 SA Hydraulic Snowplow Cylinder

item number: 9-8526 PRICE: $64.95 27 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-8526
1.5x12x1.5 SA Hydraulic Snowplow Cylinder
Item Number: 9-8526
Price: $64.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 59 of our current catalog
New, single acting displacement cylinder. Ideal for replacement on snow plows and other applications.

  • Single Acting
  • Bore x Stroke 1-1/2" x 12"
  • Pressure 2500 PSI max.
  • Rod Dia. 1-1/2"
  • Port 1/4" NPT
  • Retracted Length 18"
  • Shpg. 17 lbs.
  • Rod End Thru-hole
  • Outside Width 1-1/2"
  • Pin Hole 5/8"
  • Base End Thru-hole
  • Outside Width 1-5/8"
  • Pin Hole 5/8"
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 5

What is the diameter of the middle section of the cylinder (where the caution label is)? Also, what is the diameter of the section with the largest diameter (where the rod end is)? Thanks.

A: The main barrel diameter is 2.023". The larger portion with the gland threading is 2.373".

Is a CAD model available for this cylinder?

A: We do not have a CAD model, no.

is retracted length pin to pin or overall?

A: We define retracted length as center pin to center pin.

I am planning on paring this with a manual pump for a dump trailer, can you tell me what oil capacity I need for this hydraulic cylinder in order to get the full extension. Thanks Clark

A: It would take approximately 22 cubic inches of oil to extend this cylinder.

What are the center of pin to rod end and base end dimensions?

A: From the center of pin hole to the end is 1-1/16" on both the base and rod.

Recently Viewed
Email a Friend
1.5x12x1.5 SA Hydraulic Snowplow Cylinder
Item Number: 9-8526
Price: $64.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.5x12x1.5 SA Hydraulic Snowplow Cylinder
Additional Comments:

Please wait...
Newsletter SignUp