1.75x7.44x1.75 SA Hydraulic Snow Plow Cylinder

Item Number: 9-7880

Price: $59.99
Back to top

1.75x7.44x1.75 SA Hydraulic Snow Plow Cylinder

1.75x7.44x1.75 SA Hydraulic Snow Plow Cylinder

item number: 9-7880 PRICE: $59.99 83 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-7880
1.75x7.44x1.75 SA Hydraulic Snow Plow Cylinder
Item Number: 9-7880
Price: $59.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 59 of our current catalog
1.75" x 7.4375" x 1.75" SINGLE ACTING SNOW PLOW CYLINDER
New, single acting hydraulic displacement cylinder. Ideal for replacement on snow plows and other applications.

  • Single Acting
  • Bore x Stroke 1-3/4" x 7-7/16"
  • Pressure 2500 PSI max.
  • Rod Dia. 1-3/4"
  • Port 1/4" NPT
  • Retracted Length 13-5/8"
  • Shpg. 15 lbs.
  • Rod End Thru-hole
  • Outside Width 1-3/8"
  • Pin Hole 43/64"
  • Base End Thru-hole
  • Outside Width 2"
  • Pin Hole 43/64"
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 5

I have an old northman snow plow that this cylinder looks to be an exact replacement. I am converting it over to run on my jd 317 skid steer. One of the cylinders needs replaced, my question is: am I better off to use this or go to a double action cylinder and just use one?(as opposed to 2 single actions) Thanks

A: That is an engineering and preference question only you can determine for your situation.

where can I find a 43/64" pivot pin for this cylinder? It's a lot larger than 5/8, and smaller than 3/4. Prefer not to have a loose pin as far as wear and tear go.

A: This was an OEM cylinder for an unknown manufacturer's snowplow. Modifications to the cylinder, equipment, or another size pin may be necessary.

Is there a dimensioned drawing for this cylinder? Would like to know if this will fit the available space before I buy it. Thanks

A: We do not have a dimensional drawing of this cylinder, no.

can the mounting holes be 1 inch instead of 43/64.

A: No. There is not enough material where the pinholes are to expand them.

The cylinder pin connection are 90 deg to each other can you turn them in the direction you want them to be. Like parallel to each one.

A: Yes, the rod can be rotated so that the pins are inline with each other.

Recently Viewed
Email a Friend
1.75x7.44x1.75 SA Hydraulic Snow Plow Cylinder
Item Number: 9-7880
Price: $59.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.75x7.44x1.75 SA Hydraulic Snow Plow Cylinder
Additional Comments:

Please wait...
Newsletter SignUp