1x8x0.75 Single Acting Hydraulic Cylinder with Hand/Foot Pump Parker P/N BB269147A0

Item Number: 9-8026

Price: $89.99
TOP
Back to top

1x8x0.75 Single Acting Hydraulic Cylinder with Hand/Foot Pump Parker P/N BB269147A0

1x8x0.75 Single Acting Hydraulic Cylinder with Hand/Foot Pump Parker P/N BB269147A0

item number: 9-8026 PRICE: $89.99 117 In Stock Surplus Item



Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-8026
1x8x0.75 Single Acting Hydraulic Cylinder with Hand/Foot Pump Parker P/N BB269147A0
Item Number: 9-8026
Price: $89.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 63 of our current catalog
Description

1" x 8" x 0.75" SA HYDRAULIC CYLINDER W/ PUMP
New. PARKER CYLINDER DIVISION P/N BB269147AO custom, welded cylinder with thread-in gland cap. Originally intended for use in barber and hairdressing chairs. Both ports at base end of cylinder. Extend port has cartridge valve marked "Parker Mexico KR CV081P65," not common with retract port. 1/8" NPT breather in rod end gland.

Spring assembly mounted to cartridge block acts as pump to extend and retract cylinder. Full extension can be achieved in 15 pumps. Retract stroke is achieved by pumping spring assembly past its detented position and applying pressure to rod, can occur at any point along extension.

Note: Customer must fill reservoir with good quality hydraulic fluid via the 1/8" NPT breather orifice, and bleed the system of air, before operation.

CYLINDER SPECIFICATIONS
  • Single Acting
  • Bore x Stroke 1" x 8"
  • Barrel Thickness 1/8"
  • Pressure 925 PSI max.
  • Rod Dia. 3/4"
  • Ports SAE 4
  • Retracted Length 14-1/2"
  • Shpg. 12 lbs.
END MOUNTINGS  
  • Rod End Threaded
  • Thread size-Pitch 5/8"-18
  • Thread Length 5/8"
  • Base End Four Tapped Mounting Holes
  • Thread size-Pitch 5/16"-18"
  • Thread Depth 3/4"
  • Bolt circle 5/8" B.C.

PUMP SPECIFICATIONS
  • Manifold Block and Pump Assembly
  • Block Dimensions 3" x 3" x 1-1/4"
  • Spring Assembly Dimensions 3-1/4" x 1-1/2" x 1-3/8"
  • Mount Two 3/8"-16 tapped holes on 3-3/16" centers
  • Ball Checks Two in SAE 6 cavities, Spring-loaded
  • Ports SAE 4
  • Check Valve PARKER Mexico KR CV081P65
  • Ball Checks Two in SAE 6 cavities, Spring-loaded
  • End Attachment 1" wide tang w/ 1/4" pin holes
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Recently Viewed
Email a Friend
1x8x0.75 Single Acting Hydraulic Cylinder with Hand/Foot Pump Parker P/N BB269147A0
Item Number: 9-8026
Price: $89.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1x8x0.75 Single Acting Hydraulic Cylinder with Hand/Foot Pump Parker P/N BB269147A0
Additional Comments:

Please wait...