0.250 cu in Marzocchi Hydraulic Motor

Item Number: 9-7870

Price: $49.95
Back to top

0.250 cu in Marzocchi Hydraulic Motor

0.250 cu in Marzocchi Hydraulic Motor

item number: 9-7870 PRICE: $49.95 28 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-7870
0.250 cu in Marzocchi Hydraulic Motor
Item Number: 9-7870
Price: $49.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
New, MARZOCCHI model 1AMS6STNGP043 uni-directional hydraulic motor. Side ports.

  • Disp. 0.25 cu. in. / rev.
  • Motor Type Gear
  • Pressure:
      3000 PSI cont.
      3600 PSI peak
  • Torque 5 in-lbs @ 1450 psi
  • Speed:
      1,725 RPM @ 1.87 GPM
      3,450 RPM @ 3.74 GPM
      4000 RPM max
  • Rotation CCW
  • Mount 4 bolt USA 4F17
  • Shaft 0.172" thick tang
  • Ports SAE 8
  • Case Drain N/A
  • Size 4-3/8" x 3" x 3-1/4"
  • Shpg. 5 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 6

In reference to CCW is that standing in front of the shaft drive or looking at it from the back of the drive.

A: It would be CCW if the hydraulic motor shaft was pointing at you and you were looking back at it, It will need to rotate Counter Clock Wise (CCW)

Can this motor be use as a pump?

A: No it cannot.

They are symbols such as "TK" and "PR" on the side of the motor, what do those symbols mean? Since the hydraulic motor is unidirectional, how do I make sure my input is on the correct port of the motor.

A: The TK means tank and the PR means pressure.

Would this be suitable to direct drive a radiator fan in a remote mount radiator for a gas engine? Approximately 14-16". Would a power steering pump and power steering fluid be compatible?

A: We cannot say. We have very little information about this product and cannot state seal compatibility with power steering fluid.

The rotation is ccw,it also mentions uni-directional, can we run this pump in both ccw and CW?

A: No. Uni-directional means one direction. Bi-directional would mean it could go both ways.

Is the torque number correct? Based on numbers it comes to 57 in/lb. Thanks

A: It does appear that your figure is accurate. We should have our web page updated to reflect that shortly.

Recently Viewed
Email a Friend
0.250 cu in Marzocchi Hydraulic Motor
Item Number: 9-7870
Price: $49.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

0.250 cu in Marzocchi Hydraulic Motor
Additional Comments:

Please wait...
Newsletter SignUp