1.25 cu in Cross Hydraulic Motor 40MH12DACSC

Item Number: 9-7073-125

Price: $246.50
Back to top

1.25 cu in Cross Hydraulic Motor 40MH12DACSC

1.25 cu in Cross Hydraulic Motor 40MH12DACSC

item number: 9-7073-125 PRICE: $246.50 16 In Stock Regular Stock Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-7073-125
1.25 cu in Cross Hydraulic Motor 40MH12DACSC
Item Number: 9-7073-125
Price: $246.50
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 79 of our current catalog

You may also consider:


Brand new, Cross hydraulic gear motor. Model 40MH12DACSC. Pressure balanced loading plates for high efficiency. Aluminum body for good heat dissipation. Pressure lubricated Teflon impregnated sleeve bearings. Internal check valves eliminate need for case drain at shaft seal pressures under 250 PSI.

  • 1.25 cu in disp
  • Max Pressure 3000 PSI
  • Max speed 3000 cont
  • 10.9 GPM for 1800 RPM
  • 13.5 HP at 1800 RPM, 2500 PSI
  • 475 in-lbs. torque at 2500 PSI
  • Reversible Rotation
  • SAE A 2 bolt mount
  • 5/8" dia x 1-1/4" keyed shaft
  • SAE 12 ports
  • 1/4" NPT drain port
  • 4-13/16" x 5-1/8" x 4-15/16"
  • Shpg 9 lbs

Prop 65 Warning WARNING: Cancer and Reproductive Harm

More Specs
Links To More Info On This Item
Click to view...

Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 5

My application is 10 GPM with pump flow @ 1000 PSI on a mower. Will this motor work under these conditions? The motors I have now are way too slow and I am trying to achieve around 2500 RPM if possible to get the blade speed faster. If this motor would not work, which one would. Thanks

A: This motor would work under those conditions. With that input flow you would theoretically turn 1848 rpm.

I want to power an implement off the hydraulics on my skid steer. 11 gpm flow with 1700 pressure. What would be the RPM and torque this motor would put out?

A: Theoretically with no losses you could see 2030 rpm with 320 in/lbs of torque given those input values.

Can you provide port selection for cw rotation as viewed from shaft end?

A: As facing the shaft, shaft high and idler (belly) low, pressure in the right hand port would produce CW motion of the shaft.

How well will this work for building a hydraulic chain saw

A: With no other information about the system, we cannot say.

will a cross 1.25 hyd motor 40mh12dac sc @ 6gpm 1400psi turn a automotive ac compressor being used as a portable air compressor . only need 30-40psi going for cfm (10-15) is this obtainable or am i going about this wrong?

A: That should work. You would have the hydraulic motor turning about 1100 RPM. Since the air pressure requirement is low that helps keep the power requirement of the drive motor down.

Recently Viewed

You may also consider:

Email a Friend
1.25 cu in Cross Hydraulic Motor 40MH12DACSC
Item Number: 9-7073-125
Price: $246.50
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.25 cu in Cross Hydraulic Motor 40MH12DACSC
Additional Comments:

Please wait...
Newsletter SignUp