3.30 cu in Cross Hydraulic Motor 50MH33DBCSC

Item Number: 9-7074-330

Price: $434.65
TOP
Back to top

3.30 cu in Cross Hydraulic Motor 50MH33DBCSC

3.30 cu in Cross Hydraulic Motor 50MH33DBCSC

item number: 9-7074-330 PRICE: $434.65 1 In Stock Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-7074-330
3.30 cu in Cross Hydraulic Motor 50MH33DBCSC
Item Number: 9-7074-330
Price: $434.65
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 79 of our current catalog
Description
CROSS HIGH SPEED HYDRAULIC MOTOR

Brand new, Cross hydraulic gear motor. Model 50MH33DBCSC. Pressure balanced loading plates for high efficiency. Aluminum body for good heat dissipation. Pressure lubricated Teflon impregnated sleeve bearings. Internal check valves eliminate need for case drain at shaft seal pressures under 250 PSI.

SPECIFICATIONS
  • 3.3 cu in disp
  • Max Pressure 3000 PSI
  • Max speed 3000 cont
  • 28.5 GPM for 1800 RPM
  • 33 HP at 1800 RPM, 2500 PSI
  • 1275 in-lbs. torque at 2500 PSI
  • Reversible Rotation
  • SAE B 2 bolt mount
  • 7/8" dia x 1-5/8" keyed shaft
  • SAE 16 ports
  • SAE 5 drain port
  • 6-7/16" x 6-7/8" x 6-1/2"
  • Shpg 19 lbs


California
Residents
Prop 65 Warning WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

More Specs
Links To More Info On This Item
Click to view...

Instructions
Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 2

Thinking about using this motor on a bar saw. Can it handle the shaft load of the chain? In other words can I mount a saw chain directly to the output shaft. It will put 100 % of the torque as side load.

A: The manufacturer literature does not specify the side load tolerance. The shaft uses a teflon-impregnated sleeve bushing which may not be able to handle the full output torque translated into side load. We have had no feedback from customers who have attempted to operate these motors in that fashion.

I am going to replace a small diesel engine with a hydraulic motor. The application is a tow behind vibratory roller. I think this motor should have enough power and speed to replace the diesel engine which is the same as the reefer engines on trailers. I think the hydraulic motor is going to need some sort of free wheeling pulley in order to allow the eccentrics inside the drum to continue turning freely when the hydraulic circuit is off. Do you have or know where I can get such a pulley to mount on this motor? Thanks much! Ken

A: It sound like a freewheeling or overrunning clutch assembly may be the best way to deal with a continued motion. I believe those are available from other vendors online.

Recently Viewed
Email a Friend
3.30 cu in Cross Hydraulic Motor 50MH33DBCSC
Item Number: 9-7074-330
Price: $434.65
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3.30 cu in Cross Hydraulic Motor 50MH33DBCSC
Additional Comments:

Please wait...
Newsletter SignUp