3.80 cu in Cross Hydraulic Motor 50MH38DBCSC

Item Number: 9-7074-380

Price: $434.65
Back to top

3.80 cu in Cross Hydraulic Motor 50MH38DBCSC

3.80 cu in Cross Hydraulic Motor 50MH38DBCSC

item number: 9-7074-380 PRICE: $434.65 4 In Stock Regular Stock Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-7074-380
3.80 cu in Cross Hydraulic Motor 50MH38DBCSC
Item Number: 9-7074-380
Price: $434.65
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 79 of our current catalog

Brand new, Cross hydraulic gear motor. Model 50MH38DBCSC. Pressure balanced loading plates for high efficiency. Aluminum body for good heat dissipation. Pressure lubricated Teflon impregnated sleeve bearings. Internal check valves eliminate need for case drain at shaft seal pressures under 250 PSI.

  • 3.8 cu in disp
  • Max Pressure 3000 PSI
  • Max speed 3000 cont
  • 33 GPM for 1800 RPM
  • 38 HP at 1800 RPM, 2500 PSI
  • 1450 in-lbs. torque at 2500 PSI
  • Reversible Rotation
  • SAE B 2 bolt mount
  • 7/8" dia x 1-5/8" keyed shaft
  • SAE 16 ports
  • SAE 5 drain port
  • 6-5/8" x 6-7/8" x 6-1/2"
  • Shpg 19 lbs

Prop 65 Warning WARNING: Cancer and Reproductive Harm

More Specs
Links To More Info On This Item
Click to view...

Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 4

My skid produces 33 gallons gpm at 3000 psi I was wondering if this motor will work for a 84 inch snow blower

A: If the input speed and torque required for the snow blower are equal to or less than what this motor would develop with that input flow and pressure, then it may. We have no idea about what your snow blower requires and cannot say with any certainty if it will or not.

My machine produces 28 gpm at 2500 psi.i need between 1200 to 1600 inch pounds at 1500 rpm to run my mulcher. Will this motor work?

A: With that input flow and pressure this motor will produce approximately 1700 rpm with 1450 in/lbs of torque.

My machine has a flow of 13 gpm @ 2800 psi, what do you think about the performance it will give me on a 4 ft slasher with a 1 :2 gear box.

A: This would turn about 750 RPM and 1600 in.lbs. of torque. You may want to consider a low speed high torque motor instead.

This engine is for use on a disc cutter wall 32 "?

A: Sorry we have no information as to what the requirement of your application is.

Recently Viewed
Email a Friend
3.80 cu in Cross Hydraulic Motor 50MH38DBCSC
Item Number: 9-7074-380
Price: $434.65
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3.80 cu in Cross Hydraulic Motor 50MH38DBCSC
Additional Comments:

Please wait...
Newsletter SignUp