12.2 cu in Bucher Hydraulic Motor

Item Number: 9-7567

Price: $148.95
TOP
Back to top

12.2 cu in Bucher Hydraulic Motor

12.2 cu in Bucher Hydraulic Motor

item number: 9-7567 PRICE: $148.95 116 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 9-7567
12.2 cu in Bucher Hydraulic Motor
Item Number: 9-7567
Price: $148.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 84 of our current catalog
Description
12.2 cu in BUCHER HYD MOTOR
New, Bucher Hydraulics model BRGL200A18. Compare to White RG series motors.

SPECIFICATIONS
  • Disp. 12.2 cu. in. / rev.
  • Motor Type Geroler
  • Pressure:
      2000 PSI cont.
      2750 PSI int.
  • Torque:
      3350 in-lbs. cont.
      4650 in-lbs. int.
  • Speed:
      220 RPM cont.
      280 RPM int.
  • Flow:
      12 GPM cont.
      15 GPM int.
  • Rotation Reversible
  • Mount 2 bolt SAE A
  • Shaft 25 MM dia x 1-5/8" keyed
  • Ports 1/2 BSPP
  • Case Drain None
  • Size 7-3/8" x 5-1/4" x 4"
  • Shpg. 21 lbs.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 4

Dear Sir, (1) Do you have bolt on control valve for this motor? I mean control valve that is bolted directly on the motor ? (2)If not do you have any other motor ,low speed/high torque with control valve mounted on them? (3) 25 mm 3 piece aluminium jaw coupler for marine use. Thanks.

A: We do not have any such items. 3 jaw aluminum couplers are not recommended for transmitting torque from a hydraulic motor. While they are rated for higher horsepowers at higher speeds, at the low speeds and high torque found in hydraulic motor use splits them like eggshells.

Do you sell a sprocket that can be coupled with this motor? The sprocket needs to drive a #80 (1" pitch) chain.

A: We do not have any sprockets for a 25mm drive, unfortunately.

What is the size of the keyway? It appears to have a 1" dia. shaft, with a keyway that is 1 5/8" long by XX. I need to know what size of keyway coupler to get.

A: This motor has a 25mm keyed shaft with an 8mm key in it.

is it a bearing motor , can i atach my wheel directly to the shaft

A: While the shaft is supported by a bearing, we have no data regarding the side load limitations.

Recently Viewed

You may also consider:

Email a Friend
12.2 cu in Bucher Hydraulic Motor
Item Number: 9-7567
Price: $148.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

12.2 cu in Bucher Hydraulic Motor
Additional Comments:

Please wait...
Newsletter SignUp