4.74 cu in Dynamic BMPH80H2KP Hydraulic Motor

Item Number: 9-7077-80

Price: $151.45
TOP
Back to top

4.74 cu in Dynamic BMPH80H2KP Hydraulic Motor

4.74 cu in Dynamic BMPH80H2KP Hydraulic Motor

item number: 9-7077-80 PRICE: $151.45 3 In Stock Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-7077-80
4.74 cu in Dynamic BMPH80H2KP Hydraulic Motor
Item Number: 9-7077-80
Price: $151.45
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 80 of our current catalog
Description
4.74 cu in DYNAMIC BMPH80H2KP HYD MOTOR
Brand new DYNAMIC BMPH series hydraulic motors. Gerotor power element. Interchangeable with the following motor lines: CHAR-LYNN H, DANFOSS DH, WHITE RS, PARKER - ROSS MG/TB.

SPECIFICATIONS
  • Disp. 4.74 cu. in. / rev.
  • Motor Type Gerotor
  • Rotation Reversible
  • Pressure:
      2031 PSI cont.
      2538 PSI int.
  • Torque:
      1292  in-lbs. cont.
      1646  in-lbs. int.
  • Speed:
      770  RPM cont.
      960  RPM int.
  • Flow:
      15.8 GPM cont.
      19.8 GPM int.
  • Mount 2 bolt SAE A
  • Shaft 1" dia. x 1.57" w/1/4" Woodruff key, tapped 1/4-20
  • Ports 1/2" NPT
  • Case Drain SAE 4
  • Size 5-5/8" x 5-3/16" x 3-1/4"
  • Shpg. 17 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 3

will this motor run on 12 gpm systems? want to run a chainsaw bar with this motor.

A: Yes, this motor will operate at that flow with approximately 583 rpm output.

I am looking for a motor to run my post hole drill? would this be a choice or do you have something that would work. It runs off my skid steer new holand 885 hyd.is about 18 gals. a min.

A: Without more information we cannot say. Please contact our Product Support department to discuss your application.

Does the case drain need to be hooked up for this motor?

A: No, it comes plugged from the factory. Unless you have an application with high pressure on the outlet port it is usually not necessary.

Recently Viewed
Email a Friend
4.74 cu in Dynamic BMPH80H2KP Hydraulic Motor
Item Number: 9-7077-80
Price: $151.45
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

4.74 cu in Dynamic BMPH80H2KP Hydraulic Motor
Additional Comments:

Please wait...
Newsletter SignUp