9.39 cu in Dynamic BMSY160E2GS Hydraulic Motor

Item Number: 9-7081-160

Price: $295.35
Back to top

9.39 cu in Dynamic BMSY160E2GS Hydraulic Motor

9.39 cu in Dynamic BMSY160E2GS Hydraulic Motor

item number: 9-7081-160 PRICE: $295.35 Out of Stock - More on Order Regular Stock Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-7081-160
9.39 cu in Dynamic BMSY160E2GS Hydraulic Motor
Item Number: 9-7081-160
Price: $295.35
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 80 of our current catalog
Brand new. DYNAMIC BMSY series hydraulic motors. Gerolor power element. Tapered roller bearings on output shaft for high axial and radial load capacity. Interchangeable with the following motor lines: CHAR-LYNN 2000, DANFOSS OMS / OMSS, WHITE RE / DH, PARKER ROSS MB /TF.

  • Brand Dynamic
  • Model BMSY160E2GS
  • Family BMSY Series
  • Displacement 9.39 cu. in. / rev.
  • Motor Type Gerotor
  • Rotation Reversible
  • Pressure:
       3045 PSI cont.
       3262 PSI int.
  • Torque:
       4292 in-lbs. cont.
       4778 in-lbs. int.
  • Speed:
       470 RPM cont.
       560 RPM int.
  • Flow:
       19.8 GPM cont.
       23.7 GPM int.
  • Mount 2 bolt SAE A
  • Shaft 1-1/4" dia x 1.89" long w/ 5/16" keyway, tapped 1/4"-20
  • Ports SAE 10
  • Case Drain SAE 4
  • Size 7.25" x 5.1825" x 4.0625"
  • Shpg. 28 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 4

I have 2 of these motors and they have a port A and a port B on them. I am looking from the shaft end of the motor and I want them to turn clockwise. Can you tell me which port to hook up as supply to make this happen.

A: The standard configuration is power to A with B as return produces CW rotation as facing the shaft.

I have one of these motors that is going into a tight location and the inlet/ outlet are on the side. Near the inlet/ outlet there are 2 threaded holes and I was wondering if they made a block that bolted onto the motor converting the side inlet/ outlet 90 degrees to rear of motor?

A: Not for this design, no.

I am looking at powering 2 motors BMSY160E2GS at the same time using the aux hydraulics from my Bobcat 20gpm 3000 psi. switch in cab. What components do I need to accomplish this? (relief valves, proportioner, valve body, etc.)

A: Please contact our Product Support department to talk through your application to see what you may need.

Will this motor power a 6foot bush hog mower with a skid steer with a 21 gpm capacity?

A: With no other information, we cannot say.

Recently Viewed
Email a Friend
9.39 cu in Dynamic BMSY160E2GS Hydraulic Motor
Item Number: 9-7081-160
Price: $295.35
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

9.39 cu in Dynamic BMSY160E2GS Hydraulic Motor
Additional Comments:

Please wait...
Newsletter SignUp