5 BOLT WHEEL HUB Brand new, machined cast iron hub for use in drive wheel applications. Mounts on 1-1/4" tapered keyed shaft. Ideal for use with hydraulic wheel motors in hydrostatic vehicles. Mounting holes tapped for use with wheel studs or lug bolts.
can you please advise freight cost to Brisbane Australia. What freight methods do you have available as options, prices please if possible.
A: Please contact our Customer Service department with your order and shipping details and we can provide an international quote.
Date Submitted: 12/10/2017
Is the 1 1/4 " the large end then it tapers to 1" ?
A: The small end of the taper measures 1.065", approximately.
Date Submitted: 06/27/2017
Can I get this hub for an inch and a quarter non tapered shaft
A: We do not have any wheel hubs for smooth keyed shaft currently.
Date Submitted: 05/01/2017
Do they offer a 5 lug with a 1inch axle
A: We do not have one for a keyed drive, no.
Date Submitted: 12/20/2016
Is the "Face" of this hub the side with the single stage "boss" (the smaller OD) or is it the side with the 2-stage "boss" (the one that appears to have the larger OD)? I define the face of the hub as the side with the 1 1/4" diameter on the hub and the back side of the hub has the larger diameter on the hub. Please advise. Thanks, Mike
A: The face of this hub that faces the hydraulic motor when installed is the side that has the multiple stepped pilot. The face that faces outward that the wheel would rest against has the single step pilot.
Date Submitted: 09/22/2016
What is the name of the company that makes this product and or do they make one for a 1 5/8" spindle with key tap
A: These are made by G & G manufacturing in Omaha, Nebraska. They do not show one for that size available in their catalog.
Date Submitted: 04/06/2016
Is there a print or 3D model available?
A: We do not have a print, CAD drawing, or 3D model available for this item.
Date Submitted: 02/11/2016
What part of this is "tapered"? Is the 1 1/4" bore tapered? Is the 2 1/2" hub that matches the wheel tapered? What is the bolt circle diameter?
A: This hub fits onto the tapered shaft of a hydraulic motor. The 2-1/2" pilot is designed to fit into the center of the wheel that is being bolted to it. The bolt circle is 4-1/2"