12.4 cu in WHITE DRIVE PRODUCTS 430200W3828CAAAA HYDRAULIC MOTOR
New, WHITE DRIVE PRODUCTS hydraulic motor. Heavy-duty bearings. Features include a heavy-duty drive link, pressure-compensated balance plate, and valve-in-rotor design for increased performance and longevity.
Brand White Drive Products
Displacement 12.4 cu. in. / rev.
Motor Type Gerotor
Pressure: 3000 PSI cont. 3250 PSI int.
Torque: 4650 in-lbs. cont 5250 in-lbs. int.
Speed: 300 RPM cont. 370 RPM int.
Flow: 16 GPM cont. 20 GPM int.
Mount Four-bolt wheel
Shaft 35mm tapered x 4.20" long w/ 8mm keyway and threaded end w/ castle nut
Pages 64-66 of this document detail the physical characteristics of this series.
Date Submitted: 02/01/2018
Look like a tapered shaft but not described like it is
A: The manufacturer literature defines that shaft as a 35mm tapered shaft. From a base diameter of 35mm, the shaft has a 1:10 taper over a length of 36mm (1.42). The copy will be amended to reflect that.
Date Submitted: 01/31/2018
will this replace a hydro gear motor on a bush hog zero turn mower.hydro gear hgm-15e-3051
A: Unknown. We have no information about that motor to compare specs.
Date Submitted: 01/29/2018
If my pump puts out 1.5 gal a min will this motor still run
A: Yes, but the efficiency at pressures above 250 psi will drop so the speed will decrease with higher pressure. At 250 psi the motor will turn approximately 17 rpm with approximately 45 ft/lb torque. At 2500 psi the speed will drop to less than 5 rpm with torque in the 350 ft/lb range.