21.05 cu in Dynamic BMER-2-350-WS-T4 Wheel Motor

Item Number: 9-8592-350

Price: $363.00
TOP
Back to top

21.05 cu in Dynamic BMER-2-350-WS-T4 Wheel Motor

21.05 cu in Dynamic BMER-2-350-WS-T4 Wheel Motor

item number: 9-8592-350 PRICE: $363.00 1 In Stock Regular Stock Item


calculate shipping
Calculate Shipping for Item 9-8592-350
21.05 cu in Dynamic BMER-2-350-WS-T4 Wheel Motor
Item Number: 9-8592-350
Price: $363.00
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 82 of our current catalog
Description
21 cu in HYD WHEEL MOTOR
Brand new, DYNAMIC BMER series wheel mount hydraulic motor. Interchangeable with PARKER and WHITE motors.

SPECIFICATIONS
  • Model BMER2-350-WS-T4-S
  • Disp. 21.05 cu.in./rev.
  • Pressure
    2970 PSI (Cont.)
    3480 PSI (Int.)
  • Torque
    8009 in-lb. (Cont.)
    9160 in-lb. (Int.)
  • Speed
    220 RPM (Cont.)
    270 RPM (Int.)
  • Flow
    19.8 GPM (Cont.)
    25 GPM (Int.)
  • Rotation Reversible
  • Mount 4 Bolt Wheel
    5.812 bolt circle 3-1/4" pilot dia.
  • Shaft 1-1/4" tapered x 4.21" shaft w/5/16" key and threaded end
  • Ports SAE 10
  • Size 5.43" x 5.25" x 5.45"
  • Shpg. 33 lbs.
More Specs
Click on boxes below for more information about this product.
Additional InformationMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 2

21.05 cu in Dynamic BMER-2-350-WS-T4 Wheel Motor Item Number: 9-8592-350 Considering 4 of these as drive motors for a utility vehicle with a GVW of 2500 lbs. Can you provide the bearing load specs. for the motors?

A: http://dynamicfc.com/documents/2016DynamicFullCatalog_Motors_BMER2.pdf On page 11 of this document the bearing load charts are detailed.

This might be a hard question but here it goes!!! I'm building a DIY shallow well drill .. The bmer wheel motor would be used to run the drill and the weight of the shaft would be pulling on the wheel motor and the hub nut. The weight would be around 3 to 4 tons. Would the bearing handle and hub nut handle the weight?

A: The maximum thrust load capability of this series of motor is 450 dekanewtons/1000 lbs. Hanging 3 to 4 tons from the shaft will destroy the motor.

Recently Viewed
Email a Friend
21.05 cu in Dynamic BMER-2-350-WS-T4 Wheel Motor
Item Number: 9-8592-350
Price: $363.00
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

21.05 cu in Dynamic BMER-2-350-WS-T4 Wheel Motor
Additional Comments:

Please wait...
Newsletter SignUp