7.20 cu in Dynamic BMER-2-125-WS-T4 Wheel Motor

Item Number: 9-8592-125

Price: $298.05
TOP
Back to top

7.20 cu in Dynamic BMER-2-125-WS-T4 Wheel Motor

7.20 cu in Dynamic BMER-2-125-WS-T4 Wheel Motor

item number: 9-8592-125 PRICE: $298.05 3 In Stock Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-8592-125
7.20 cu in Dynamic BMER-2-125-WS-T4 Wheel Motor
Item Number: 9-8592-125
Price: $298.05
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 82 of our current catalog
Description
7.2 cu in HYD WHEEL MOTOR
Brand new, DYNAMIC BMER series wheel mount hydraulic motor. Interchangeable with PARKER and WHITE motors.

SPECIFICATIONS
  • Model BMER2-125-WS-T4-S
  • Disp. 7.2 cu.in./rev.
  • Pressure
    2970 PSI (Cont.)
    3480 PSI (Int.)
  • Torque
    2876 in-lb. (Cont.)
    3363 in-lb. (Int.)
  • Speed
    360 RPM (Cont.)
    490 RPM (Int.)
  • Flow
    14 GPM (Cont.)
    15.8 GPM (Int.)
  • Rotation Reversible
  • Mount 4 Bolt Wheel 5.812 bolt circle 3-1/4" pilot dia.
  • Shaft 1-1/4" tapered x 4.21" shaft w/5/16" key and threaded end
  • Ports SAE 10
  • Size 4.68" x 5.24" x 5.43"
  • Shpg. 29 lbs.
More Specs
Click on boxes below for more information about this product.
Additional InformationMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 10

Will this fit zmaster model no 74251 serial no 240000599

A: We do not have a way to cross reference different manufacturers and are unable to tell if this will fit your application.

What capacity are these rated for?

A: On page 11 of the linked document, the bearing load curve for the wheel mount is displayed. It appears to be in metric units, so will need to be converted. http://dynamicfc.com/documents/2016DynamicFullCatalog_Motors_BMER2.pdf

What is the minimum continuous flow that will drive this motor?

A: The lowest rated flow in the manufacturer literature is 0.53 gpm/2 lpm. This flow can be used between 254 and 2031 psi. At 254 psi the motor will provide 6 rpm with 389 in-lbs torque; at 2031 the motor will provide 1 rpm with 3310 in-lbs torque.

can this motor handle thrust pressure also

A: This motor is stated to tolerate 450 dekanewtons/1000 lb-force thrust load.

I have a scag svr36a-20fx ser. # ea 2000231 and need to replace the wheel motor #483807 hydro-gear hgm-12p-7172 since these are out of the price range of the worth of the machine could you suggest a more reasonable replacement I have a welder and mechanic on site but would like to keep this machine as a back up.

A: We have no information for any of the specifications of the wheel motors for that equipment, and cannot say what would replace them. The selection of wheel motors we currently have is on our website.

Tell me can I use this motor with my pump this series 9-7503-16

A: The continuous flow rating of the motor is less than that of the pump in the low-pressure/high-volume side. There is no guarantee that every load will cause the pump to shift into the high-pressure/low-volume output. Based on that, we must say no.

what wheel motor would i need for a cub cadet recon zero turn? All i know is that they are white motors.

A: We have no information regarding what OEM products Cub Cadet uses on it's equipment.

Will control valve 9-7974 work for this motor?

A: Yes, as long as it's understood that the work ports will be blocked in neutral, so when the valve is allowed to center the motor will slam to a stop, and if rotation is still occurring potential damage of the shaft or motor is a possibility if enough inertia is built up.

my parker pump has this number tfo24ous081aadd then mb150208cccg then 07903aa 1432 made in usa. compatible?

A: This one is too small of displacement. The 9-8592-230 is just a little smaller (13.91 cu in vs 14.5 for the Parker). The mounting and shaft would be identical.

what pump would I need to go with these drive motors to run two of them also need forward and reverse controls.

A: A setup using two of these motors (often found on Zero Turn mowers) is usually driven from variable displacement piston pumps. The valving in them also gives you speed and directional control. Sometimes dual pumps are used and other applications use two individual pumps driven from the same source.

Recently Viewed
Email a Friend
7.20 cu in Dynamic BMER-2-125-WS-T4 Wheel Motor
Item Number: 9-8592-125
Price: $298.05
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

7.20 cu in Dynamic BMER-2-125-WS-T4 Wheel Motor
Additional Comments:

Please wait...
Newsletter SignUp