9.52 cu in Dynamic BMER-2-160-WS-T4 Wheel Motor

Item Number: 9-8592-160

Price: $301.50
Back to top

9.52 cu in Dynamic BMER-2-160-WS-T4 Wheel Motor

9.52 cu in Dynamic BMER-2-160-WS-T4 Wheel Motor

item number: 9-8592-160 PRICE: $301.50 1 In Stock Regular Stock Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-8592-160
9.52 cu in Dynamic BMER-2-160-WS-T4 Wheel Motor
Item Number: 9-8592-160
Price: $301.50
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 82 of our current catalog
Brand new, DYNAMIC BMER series wheel mount hydraulic motor. Interchangeable with PARKER and WHITE motors.

  • Model BMER2-160-WS-T4-S
  • Disp. 9.52 cu.in./rev.
  • Pressure
    2970 PSI (Cont.)
    3480 PSI (Int.)
  • Torque
    3983 in-lb. (Cont.)
    4646 in-lb. (Int.)
  • Speed
    375 RPM (Cont.)
    470 RPM (Int.)
  • Flow
    15.8 GPM (Cont.)
    19.8 GPM (Int.)
  • Rotation Reversible
  • Mount 4 Bolt Wheel 5.812 bolt circle, 3-1/4" pilot dia.
  • Shaft 1-1/4" tapered x 4.21" shaft w/5/16" key and threaded end
  • Ports SAE 10
  • Size 4.80" x 5.24" x 5.43"
  • Shpg. 30 lbs.
More Specs
Click on boxes below for more information about this product.
Additional InformationMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 6

Will this motor fit a CL 30 skid steer?

A: Unfrotunately we do not have any way of knowing what a CL30 skid steer woud need for a wheel motor.

What pump should I use to run 2 of the wheel motors.

A: One which will provide enough output flow to turn the motors at your desired rpm and will achieve the desired pressure (within the motor's capabilities).

Is this the wheel motor for club cadet 60 rear wheel

A: We have no information regarding that unit and cannot say.

Need a motor. Same as in a Ford CL 40 Skid steer. CL 40 skid steer part number is ERK19088. The ERK stands for Erickson, who made their own (Erickson 1242 model) and the Ford CL 40 for a while. The Erickson 1242 has the same wheel drive motor as the CL 40. This motor was made by TRW Spec is MAB24003 A1 the Code is 275 85 1 Doing research I found Char-lynn has a motor that is suppose to cross reference which is 105-1181-006 if that helps. Let me know what you have. Thank in advance.

A: Based on the TRW model number, the closest thing we have is item 9-8592-300. The TRW model displacement is 17.8 cubic inches/revolution; 9-8592-300 has a 18.08 cubic inch displacement. It will not be an exact match for speed, but will have the same mount, shaft size, and ports.

What wheel motor replaces a hydro-gear hgm-15e-3138?

A: We have no information about that motor to make a comparison or recommendation.

I am looking for a compatible replacement for this motor. I purchased this motor last year but i need more rpm. I need 600-800 rpm. Do you have anything available with the same size bolt circle and the 1 1/4 tapered shaft that turns faster? Thanks Dan

A: We do not have anything with the same mounting that will turn that RPM with a comparable rated flow.

Recently Viewed

You may also consider:

Email a Friend
9.52 cu in Dynamic BMER-2-160-WS-T4 Wheel Motor
Item Number: 9-8592-160
Price: $301.50
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

9.52 cu in Dynamic BMER-2-160-WS-T4 Wheel Motor
Additional Comments:

Please wait...
Newsletter SignUp