12 Volt DC Delta Power Hydraulic Power Unit S103T*4149

Item Number: 9-8509

Price: $199.95
Back to top

12 Volt DC Delta Power Hydraulic Power Unit S103T*4149

12 Volt DC Delta Power Hydraulic Power Unit S103T*4149

item number: 9-8509 PRICE: $199.95 24 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 9-8509
12 Volt DC Delta Power Hydraulic Power Unit S103T*4149
Item Number: 9-8509
Price: $199.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
New, DELTA POWER HYDRAULIC CO model# S103T*4149 hydraulic power unit with DC motor. Hydraulic power source ideal for operating double-acting hydraulic cylinder for scissor lift, snow plow, and/or material handling applications. Intended for use with separate directional control valve (not included). Steel reservoir for horizontal mounting.

  • Voltage 12 VDC
  • Amperage 180 Amps @ 3000 PSI, 120 Amps @ 2000 PSI
  • Duty Intermittent
  • Rotation Clockwise (facing rear end of motor)
  • Flow 0.6 GPM @ 2000 PSI
  • Flow 0.4 GPM @ 3000 PSI
  • Valving None
  • Reservoir 3/4 gallon (1/2 gallon useable)
  • Ports Two 1/4" I.D. ports on 1-1/2" centers w/ two 5/16"-18 tapped holes on 1-1/2" centers
  • Mount Two 3/8"-16 tapped holes on 1-11/16" centers, Bottom of unit
  • Orientation Horizontal
  • Size 14-7/8" x 6-1/2" x 5-7/8"
  • Shpg. 18 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 9

can I hook this pump to my agriculture tractors existing hydraulic supply to replace tractrs inoperative pump, need to run bucket and steerig

A: This pump can only run for 30-45 seconds, then motor needs to cool a couple minutes.

Will this work for a dump trailer with single cylinder or with cylinder on scissor hoist?

A: Due to the limited run time inherent to the motors used in these types of products, it would depend on the size of the cylinder being operated. Please contact our Product Support department to discuss your system.

Hi, Would you ship this item to Australia? Thanks

A: We would. Please contact our Customer Service department with your order and shipping details and we can provide an international quote.

Would this unit work for a dump trailer with 2 cylinders?

A: It is very unlikely that this would produce enough volume to extend two cylinders within the intermittent thermal rating duty cycle of the motor unless they were very small cylinders.

Would this work on my Rv stands

A: We have no information about your system/application and cannot say.

what else would I need to operate a hydraulic cylinder in bought directions?

A: At a minimum: A power source, a momentary switch to activate the power unit, a directional control valve, fittings, hoses. A gauge is always a good idea as well.

will your hydraulic power unit 9-8509 work on a snoway plow that has right & left angles plus power up & down action feature also

A: This unit has no valving, so it would make a good power source to operate an additional external directional control valve. We have no units which would come with two double-acting spools to operate the double acting lift/lower and the two power angles (which typically act as one double acting, unless the blade is a double-v).

Is this unit suitable for electronics reversing control: If I switch polarity, will this unit flow in the opposite direction?

A: No, it will not. A separate electric directional control valve would provided double acting action if necessary.

what type of directional control valve is needed to operate this unit with the KG11 remote control?

A: If the KG11 remote were used, any manual directional control valve would work as long as the button were pressed to power the motor and provide system flow.

Recently Viewed
Email a Friend
12 Volt DC Delta Power Hydraulic Power Unit S103T*4149
Item Number: 9-8509
Price: $199.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

12 Volt DC Delta Power Hydraulic Power Unit S103T*4149
Additional Comments:

Please wait...
Newsletter SignUp