HYD PISTON PUMP, CONTROL VALVE, RESERVOIR POWER UNIT Brand new WILLIAMS MACHINE and TOOL COMPANY. Hardened, chromed and ground steel spool valves. Reservoir made from 11 ga. steel, equipped with breather cap on fill port.
Would you use this on a 25 ton hydrolic press and if so what electrict motor would you use
A: This could be used on a hydraulic press, though it seems like a higher rate of flow for fine work. The power rating of the press would be determined by the bore size of the cylinder and maximum pressure at which the unit was used (up to 2500 psi). The unit requires 17 Hp for the rated values. It could be operated with 15 Hp if the pressure were regulated lower, or a 20 Hp motor could be used if the full pressure were required.