9 GPM 2 Stage Hydraulic Pump DELTA POWER HYDRAULICS C8-2 L

Item Number: 9-16148

Price: $129.95

TOP

Description
Warranty
Recently Viewed

Home
Hydraulics
Hydraulic Pumps
2 Stage (Log Splitter) Pumps
9 GPM 2 Stage Hydraulic Pump DELTA POWER HYDRAULICS C8-2 L

9 GPM 2 Stage Hydraulic Pump DELTA POWER HYDRAULICS C8-2 L

✓Add to Wishlist

calculate shipping

print page

Description
Warranty
Recently Viewed

Description

DESCRIPTION

8 GPM 2 STAGE HYD PUMP
New, DELTA POWER HYDRAULIC CO. two stage HI/LO pressure hydraulic gear pump. Ideal for applications such as log splitters, presses and other equipment where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. The change from LO to HI pressure is automatic with the LO stage pressure preset at 500 PSI. Cast iron construction. Minimum of 6 HP required for gas engine use.

SPECIFICATIONS

Displacement:
0.108 cu. in. / rev. HI press. stage
0.468 cu. in. / rev. LO press. stage
Pump Type Gear
Rotation CW
Orientation Horizontal or Vertical
Pressure: 3000 PSI max.
Speed: 3600 RPM max.
Flow:
1 GPM HI press. stage
7 GPM LO press. stage
Unloading Pressure 500 PSI
Mount 4 bolt USA 4F17
Shaft 7/16" dia. x 1-1/2" long keyed
Rqd. Filtration 25 micron
Inlet Port 3/4" NPT
Outlet Port 1/2" NPT
Size 7" x 4-1/4" x 3-7/8"
Shpg. 14 lbs.

Warranty

WARRANTY

90 Day Surplus Center WarrantyView Warranty

Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.