0.05 cu in Pesco 111530-030-03 Hydraulic Pump

Item Number: 9-5662

Price: $29.95
Back to top

0.05 cu in Pesco 111530-030-03 Hydraulic Pump

0.05 cu in Pesco 111530-030-03 Hydraulic Pump

item number: 9-5662 PRICE: $29.95 75 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-5662
0.05 cu in Pesco 111530-030-03 Hydraulic Pump
Item Number: 9-5662
Price: $29.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
0.05 CU IN PESCO 111530-030-03 HYDRAULIC PUMP
Unused old military inventory, Pesco Model 111530-030-03 aluminum hydraulic gear pump.  Note: This pump does not have a standard shaft seal. Oil allowed past shaft for case drain purposes.

  • Manufacturer Pesco
  • Model 111530-030-03
  • Disp. 0.05 cu. in. / rev.
  • Pump Type Gear
  • Rotation CW
  • Flow:
      0.39 GPM @ 1800 RPM (Calculated).
  • Mount 4 bolt on 2" center with 1-19/32" pilot.
  • Shaft 5/8" 12T spline, 1-1/16" long.
  • Inlet Port SAE 8
  • Outlet Port SAE 6
  • Size 3-3/4" x 3" x 3-1/4"
  • Shpg. 5 lb.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 2

Can you tell me what the operating psi rating is for this pump ? Thanks

A: We do not have any information detailing the intended purpose or operating conditions, unfortunately.

What are the 3 plugged holes and 1 unplugged hole near the input shaft for? Bearing lubrication? If so what should be the supply pressure and should 1 of the holes be unplugged for a drain/return?

A: The inlet and outlet ports are in the rear of the pump. The hole by the shaft appears to be a case drain line to provide lubrication, relieve excess pressure from the back of the shaft seal, and allow for a flow to aid in cooling.

Recently Viewed
Email a Friend
0.05 cu in Pesco 111530-030-03 Hydraulic Pump
Item Number: 9-5662
Price: $29.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

0.05 cu in Pesco 111530-030-03 Hydraulic Pump
Additional Comments:

Please wait...
Newsletter SignUp