0.067 cu in MTE D201-5486 Hydraulic Pump

Item Number: 9-8401-67

Price: $116.45
Back to top

0.067 cu in MTE D201-5486 Hydraulic Pump

0.067 cu in MTE D201-5486 Hydraulic Pump

item number: 9-8401-67 PRICE: $116.45 16 In Stock Regular Stock Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-8401-67
0.067 cu in MTE D201-5486 Hydraulic Pump
Item Number: 9-8401-67
Price: $116.45
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 41 of our current catalog
Brand new, MTE brand hydraulic pumps. Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Cast iron body. Made for direct drive, no shaft side-loading. Similar to Parker D Series,Webster YB Series, Rexroth S12. Made in USA.

  • Disp. 0.067 cu. in. / rev.
  • Pump Type Gear
  • Rotation CW
  • Pressure:
      3000 PSI cont.
      4000 PSI int.
  • Speed:
      3600 RPM cont.
  • Flow:
      1.04 GPM cont.
  • Mount 4 bolt USA 4F17
  • Shaft 1/2" diam. x 1-1/2" w/ 1/8" keyway
  • Inlet Port SAE 6
  • Outlet Port SAE 6
  • Case Drain N/A
  • Size 3.82" x 2.8" x 3.66"
  • Shpg. 5 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 9

What horse power motor is required to drive this pump

A: This pump requires a minimum of 4 HP gas engine to power this pump @ 3000 PSI.

what is the efficiency of this pump?

A: No efficiency rating is listed in the manufacturer literature.

Can this be used as a pump and/or motor or is it a pump only?

A: This is a pump only.

can this pump be reversed

A: This series of pumps cannot be reversed.

Would this pump work on a 1972 craftsman lawn front end loader. The original pump is a MTE C210 or do you have an idea of something compatible

A: MTE literature states the C210 is .4791 cubic inch displacement. The most comparable unit we have is 9-8401-479.

Can I mount a pulley wheel to the shaft of this pump to run a hydraulic power steering cylinder?

A: No. As stated in the description, ' Made for direct drive, no shaft side-loading.'.

can the pump operate at a low flow rate and still maintain the high pressure? and is it ethanol compatible?

A: These are only made for use with hydraulic fluid. You should be able to build full pressure at any RPM above 1000.

how much electric hp is required to run this pump?

A: The HP requirement depends on the flow rate produced (GPM) and pressure you operate with. A general rule is 1 GPM at 1500 PSI requires 1 HP.

Can this pump be used as a motor?

A: No it cannot. It is a direct drive pump only

Recently Viewed
Email a Friend
0.067 cu in MTE D201-5486 Hydraulic Pump
Item Number: 9-8401-67
Price: $116.45
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

0.067 cu in MTE D201-5486 Hydraulic Pump
Additional Comments:

Please wait...
Newsletter SignUp