0.1 cu in Fenner Pump w/4 Way OC Control Valve

Item Number: 9-9881

Price: $139.95
Back to top

0.1 cu in Fenner Pump w/4 Way OC Control Valve

0.1 cu in Fenner Pump w/4 Way OC Control Valve

item number: 9-9881 PRICE: $139.95 6 In Stock Surplus Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-9881
0.1 cu in Fenner Pump w/4 Way OC Control Valve
Item Number: 9-9881
Price: $139.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
New FENNER. Hydraulic gear pump with built-in single spool, open center, spring centered, control valve ideal for operating double acting cylinders. Cast iron housing.

  • Displacement 0.1 cu. in. / rev.
  • Rotation CCW
  • Pressure 3500 PSI cont.
  • Flow 1.6 GPM cont.
  • Speed 3450 RPM cont.
  • Relief Valve Setting 3200 PSI
  • Mount 4 bolt USA 4F17
  • Shaft 5/8" diam. x 1-1/2" keyed
  • Inlet Port SAE 8
  • Work Ports SAE 6
  • Tank Port SAE 6
  • Size 6-3/8" x 4" x 4"
  • Shpg. 12 lbs.
More Specs


Click to view...

Click on boxes below for more information about this product.
InstructionsMore Specs
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 4

Can this pump be field reversed to operate cw??

A: No, it cannot.

How many horsepower electric motor do I need to run this pump?

A: At the rated speed and pressure, it would take at least 4 hp electric.

Would this be acceptable to use for a forward / reverse hydraulic wheel motor?

A: It would very likely be far too little flow to get any more speed than a slow crawl out of a hydraulic wheel motor, and depending on the pressure rating of the motor a double relief valve would possibly need to be installed. It may lead to a disappointing result if used in that application.

is pump suited for belt (pulley) drive?

A: That is unknown.

Recently Viewed
Email a Friend
0.1 cu in Fenner Pump w/4 Way OC Control Valve
Item Number: 9-9881
Price: $139.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

0.1 cu in Fenner Pump w/4 Way OC Control Valve
Additional Comments:

Please wait...
Newsletter SignUp
  Spool Details:
  Spool 1 Double Acting, cylinder spool